AutoCodes.com | All About OBDII Engine Codes
AutoCodes - Lincoln - B2564 Lincoln

B2564 Lincoln Code - Auxiliary Blower Motor Speed Relay 2 Circuit Open/Short To Ground

- Code Popularity: 410 Views
- Repair Importance Level: 3/3
- Repair Difficulty Level: 3/3
Table of contents
Share on Facebook   Share on Twitter   Share on Linkedin

What are the Possible Causes of the DTC B2564 Lincoln?

NOTE: The causes shown may not be a complete list of all potential problems, and it is possible that there may be other causes.
  • Faulty Auxiliary Blower Motor Speed Relay 2
  • Auxiliary Blower Motor Speed Relay 2 harness is open or shorted
  • Auxiliary Blower Motor Speed Relay 2 circuit poor electrical connection
  • Faulty Blower Motor Resistor
  • Faulty Smart Junction Box (SJB)
⚠ Does your Lincoln have Safety Recalls? → Check here

How to Fix the DTC B2564 Lincoln?

Review the 'Possible Causes' mentioned above and visually examine the corresponding wiring harness and connectors. Ensure to check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.

Search for B2564 Lincoln Questions and Answers: Search here →

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B2564 Lincoln code, it typically requires 1.0 hour of labor. The specific diagnosis time and labor rates at auto repair shops can differ based on factors such as the location, make and model of the vehicle, and even the engine type. It is common for most auto repair shops to charge between $75 and $150 per hour.

What are Code Possible Symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)

Code B2564 Lincoln Description

Under normal operation, ground for the blower motor is provided through the circuit from the blower motor resistor (LO and MED-LO) and the blower motor speed relay 1 (MED-HI and HI). The blower resistor is grounded through the circuit. The blower motor speed relay coils are supplied through the circuit. Blower motor speed is received by the SJB from the rear auxiliary control through the circuit. Reference voltage for the blower speed selector resistor is provided by the SJB through the circuit. The auxiliary blower motor relay coil receives ground from the Smart Junction Box (SJB) through the circuit if any blower switch position but OFF is selected.
In LO, ground for the blower motor is provided through the blower motor resistor.
In MED-LO, blower motor speed relay 2 is grounded by the SJB through the circuit. Blower motor ground circuit is connected through one half of the blower motor resistor to the circuit. The circuit is connected through the blower motor speed relay 2 to the blower motor resistor ground circuit.
In MED-HI, blower motor speed relay 1 is grounded by the SJB through the circuit. Blower motor ground circuit is connected through blower motor speed relay 2 to the circuit. The circuit is connected through one half of the blower motor resistor to the blower motor resistor ground circuit.
In HI, blower motor speed relays 1 and 2 are grounded by the SJB through the circuit. Blower motor ground circuit 515 (OG/RD) is connected through the blower motor speed relay 1 to the circuit. The circuit is connected through the blower motor speed relay 2 to the blower motor resistor ground circuit.

OBDII Code B2564 Lincoln - Auxiliary Blower Motor Speed Relay 2 Circuit Open/Short To Ground - AutoCodes.com
B2564 Lincoln Code - Auxiliary Blower Motor Speed Relay 2 Circuit Open/Short To Ground

Need More Information on the Code?

Need more information on how to fix the B2564 Lincoln code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B2564 Lincoln code diagnosed by a professional: Find a repair shop in your area

Code B2564 Lincoln comments

Help us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the B2564 Lincoln code? Have you replaced any parts?
Any information is appreciated. Thanks