B255D Dodge Code - Decklid Open Position Sensor Circuit Performance
Quick Answer
The Convertible Top is fairly typical of convertible tops. Common causes include Faulty Decklid Open Position Sensor, Decklid Open Position Sensor harness is open or shorted, Decklid Open Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B255D Dodge indicates Decklid Open Position Sensor Circuit Performance.
- Common causes
- Common causes include Faulty Decklid Open Position Sensor, Decklid Open Position Sensor harness is open or shorted, Decklid Open Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B255D Dodge Description
1. Performance - These are time out DTCs, meaning the system timed out waiting for the next switch in sequence to change state. When the PTCM does not get the state change in the expected amount of time, it assumes something may be wrong and stops any further top operation in that direction. Typically the pump will run for 10 second before it times out.
2. Circuit Low - These DTCs set for a circuit that stays active at all times, meaning the signal circuit to the specified switch is continuously grounded. This could relate to a short to ground on the signal circuit, a sticking switch, or even a mechanical issue not allowing the switch to become inactive.
3. Correlation - These DTCs specifically relate two switches in a subcomponent (deck lid, tonneau drive, header latch, etc.) of the convertible top system. Both of the specified switches will be active in one position of the subcomponent (extended, retracted, open, closed, etc.). The switch that will not change state while attempting to operate the convertible top system, is the most likely area for attention.
What are the Possible Causes of the DTC B255D Dodge?
- Faulty Decklid Open Position Sensor
- Decklid Open Position Sensor harness is open or shorted
- Decklid Open Position Sensor circuit poor electrical connection
- Faulty Power Top Control Module (PTCM)
How to Fix the DTC B255D Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B255D Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B255D Dodge code?
Need more information on how to fix the B255D Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B255D Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B255D Dodge Code
1. What does the OBDII code B255D mean on a Dodge vehicle?
B255D indicates an issue with the Decklid Open Position Sensor Circuit performance, which monitors the position of the trunk lid (decklid).
2. What are the symptoms of code B255D in a Dodge?
Common symptoms include the trunk lid not opening or closing properly, a trunk ajar warning on the dashboard, or the trunk light staying on.
3. What causes the B255D code to appear?
Possible causes include a faulty decklid open position sensor, damaged wiring or connectors in the circuit, or a malfunctioning trunk latch assembly.
4. Can I drive with the B255D code active?
Yes, you can drive with this code, but it may cause inconvenience, such as the trunk not functioning correctly or draining the battery if interior lights stay on.
5. How do you diagnose the B255D code?
Diagnosis involves visually inspecting the wiring and connectors, testing the decklid open position sensor, and using a scan tool to monitor sensor readings.
6. Can a faulty trunk latch cause the B255D code?
Yes, a malfunctioning trunk latch assembly can cause improper sensor readings, triggering the B255D code.
7. How do you fix the B255D code?
Repairs may include replacing the decklid open position sensor, repairing damaged wiring or connectors, or replacing the trunk latch assembly if faulty.
8. What tools are needed to troubleshoot the B255D code?
You’ll need a scan tool, a multimeter for testing electrical connections, and possibly basic hand tools for accessing the trunk components.
9. How much does it cost to repair the B255D code?
Repair costs vary depending on the issue but can range from $50 for minor wiring fixes to $200-$500 if the sensor or latch assembly needs replacement.
10. Can a blown fuse cause the B255D code?
While unlikely, it's worth checking the fuses related to the trunk latch or position sensor circuit as part of the diagnostic process.
Discuss the causes and fixes for B255D Dodge OBDII Code
Code B255D Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
