AutoCodes – Chrysler – B2548 Chrysler

B2548 Chrysler Code - Tonneau Retract/Extend Limit Switch Correlation

Quick Answer

The Convertible Top is fairly typical of convertible tops. Common causes include Faulty Tonneau Retract/Extend Limit Switch, Tonneau Retract/Extend Limit Switch harness is open or shorted, Tonneau Retract/Extend Limit Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B2548 Chrysler indicates Tonneau Retract/Extend Limit Switch Correlation.
Common causes: Common causes include Faulty Tonneau Retract/Extend Limit Switch, Tonneau Retract/Extend Limit Switch harness is open or shorted, Tonneau Retract/Extend Limit Switch circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,364

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Dec 25, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B2548 Chrysler Description

The Convertible Top is fairly typical of convertible tops. There are three types of failures possible: Electrical failure (switches, wiring, motor, etc.), Hydraulic failure (fluid level low, leaks, pump internal, etc.), and Mechanical failure (binding roof, bent links, obstructions, etc.). Each type of failure mode will be rationalized by the power Top Control Module (PTCM) and labeled with a Diagnostic Trouble Code (DTC). The DTCs set by the PTCM can also be considered to have three types of failure modes:
1. Performance - These are time out DTCs, meaning the system timed out waiting for the next switch in sequence to change state. When the PTCM does not get the state change in the expected amount of time, it assumes something may be wrong and stops any further top operation in that direction. Typically the pump will run for 10 second before it times out.
2. Circuit Low - These DTCs set for a circuit that stays active at all times, meaning the signal circuit to the specified switch is continuously grounded. This could relate to a short to ground on the signal circuit, a sticking switch, or even a mechanical issue not allowing the switch to become inactive.
3. Correlation - These DTCs specifically relate two switches in a subcomponent (deck lid, tonneau drive, header latch, etc.) of the convertible top system. Both of the specified switches will be active in one position of the subcomponent (extended, retracted, open, closed, etc.). The switch that will not change state while attempting to operate the convertible top system, is the most likely area for attention.

OBDII Code B2548 Chrysler - Tonneau Retract/Extend Limit Switch Correlation - AutoCodes.com — B2548 Chrysler Code - Tonneau Retract/Extend Limit Switch Correlation

What does this mean?

What are the Possible Causes of the DTC B2548 Chrysler?

Faulty Tonneau Retract/Extend Limit Switch
Tonneau Retract/Extend Limit Switch harness is open or shorted
Tonneau Retract/Extend Limit Switch circuit poor electrical connection
Faulty Power Top Control Module (PTCM)

How to Fix the DTC B2548 Chrysler?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B2548 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B2548 Chrysler code?

Need more information on how to fix the B2548 Chrysler code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B2548 Chrysler code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B2548 Chrysler Code

1. What does the OBDII code B2548 mean on a Chrysler vehicle?

B2548 indicates an issue with the tonneau cover's retract/extend limit switch, specifically a correlation error where the switches are not operating as expected.

2. What are the common symptoms of the B2548 code?

Symptoms may include the tonneau cover not opening or closing properly, unusual noises during operation, or the tonneau cover being stuck in one position.

3. What causes the B2548 code to appear?

Common causes include faulty retract/extend limit switches, damaged wiring or connectors, mechanical obstruction in the tonneau cover system, or a malfunctioning tonneau control module.

4. How can I diagnose the B2548 code?

Start by visually inspecting the tonneau cover mechanism, checking the wiring and connectors for damage, and testing the limit switches with a multimeter. A scan tool can also help monitor switch operation.

5. Can the B2548 code be caused by a blown fuse?

Yes, a blown fuse in the tonneau cover circuit can disrupt power to the system, potentially causing the code to appear. Always check the fuse as part of your diagnosis.

6. Is it safe to drive with the B2548 code?

Yes, the vehicle is typically safe to drive, but the tonneau cover may not function correctly, which could pose a security or convenience issue.

7. How can I fix the B2548 code on my Chrysler?

Repairs may involve replacing a faulty limit switch, repairing damaged wiring, clearing debris from the tonneau cover track, or reprogramming the tonneau control module.

8. Do I need to replace the tonneau cover to resolve the B2548 code?

Not necessarily. Most issues can be resolved by repairing or replacing specific components like the limit switches or wiring without replacing the entire tonneau cover.

9. Can a software update fix the B2548 code?

In some cases, a software update for the tonneau control module may resolve calibration or communication issues related to the code. Check with your dealer for updates.

10. How much does it cost to repair the B2548 code?

Repair costs vary depending on the specific issue but may range from $100 for a simple wiring repair to $500 or more if major components like the control module need replacement.