AutoCodes – Generic – B2545:02

B2545:02 Code - Backup Lamps Circuit Short to Ground

Quick Answer

The backup lamp relay is always supplied with battery voltage. Common causes include Blown Backup Lamp Fuse, Faulty Body Control Module (BCM), Body Control Module harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B2545:02 indicates Backup Lamps Circuit Short to Ground.
Common causes: Common causes include Blown Backup Lamp Fuse, Faulty Body Control Module (BCM), Body Control Module harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 415

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 24, 2023

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B2545:02 Description

The backup lamp relay is always supplied with battery voltage. With the engine running and the transmission in the reverse position, the Transmission Control Module (TCM) sends a serial data message to the Body Control Module (BCM). The message indicates that the gear selector is in the reverse position. The BCM energizes the backup lamp relay by applying battery voltage to the backup lamp relay control circuit. When the backup lamp relay is energized, the relay switch contacts close, and battery voltage is applied through the backup lamp fuses to the backup lamp control circuits which illuminate the backup lamps. Once the driver moves the gear selector out of the reverse position, a message is sent by the TCM via serial data requesting the BCM to remove the battery voltage from the backup lamp relay control circuit. The engine must be running for the backup lamps to operate. The Diagnostic Trouble Code (DTC) will be set when the BCM detects a short to ground in the backup lamps relay control circuit.

OBDII Code B2545:02 - Backup Lamps Circuit Short to Ground - AutoCodes.com — B2545:02 Code - Backup Lamps Circuit Short to Ground

What does this mean?

What are the Possible Causes of the DTC B2545:02?

Blown Backup Lamp Fuse
Faulty Body Control Module (BCM)
Body Control Module harness is open or shorted
Body Control Module circuit poor electrical connection

How to Fix the DTC B2545:02?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B2545:01 Backup Lamps Circuit Short to Battery
B2545:02 Backup Lamps Circuit Short to Ground
B2545:02 Backup Lamps Circuit Open

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B2545:02 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B2545:02 code?

Need more information on how to fix the B2545:02 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B2545:02 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.