AutoCodes – Dodge – B253E Dodge

B253E Dodge Code - Convertible Top Header Unlatch Limit Switch Circuit Low

Quick Answer

The Convertible Top is fairly typical of convertible tops. Common causes include Faulty Header Unlatch Limit Switch, Header Unlatch Limit Switch harness is open or shorted, Header Unlatch Limit Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B253E Dodge indicates Convertible Top Header Unlatch Limit Switch Circuit Low.
Common causes: Common causes include Faulty Header Unlatch Limit Switch, Header Unlatch Limit Switch harness is open or shorted, Header Unlatch Limit Switch circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 567

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Dec 22, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B253E Dodge Description

The Convertible Top is fairly typical of convertible tops. There are three types of failures possible: Electrical failure (switches, wiring, motor, etc.), Hydraulic failure (fluid level low, leaks, pump internal, etc.), and Mechanical failure (binding roof, bent links, obstructions, etc.). Each type of failure mode will be rationalized by the power Top Control Module (PTCM) and labeled with a Diagnostic Trouble Code (DTC). The DTCs set by the PTCM can also be considered to have three types of failure modes:
1. Performance - These are time out DTCs, meaning the system timed out waiting for the next switch in sequence to change state. When the PTCM does not get the state change in the expected amount of time, it assumes something may be wrong and stops any further top operation in that direction. Typically the pump will run for 10 second before it times out.
2. Circuit Low - These DTCs set for a circuit that stays active at all times, meaning the signal circuit to the specified switch is continuously grounded. This could relate to a short to ground on the signal circuit, a sticking switch, or even a mechanical issue not allowing the switch to become inactive.
3. Correlation - These DTCs specifically relate two switches in a subcomponent (deck lid, tonneau drive, header latch, etc.) of the convertible top system. Both of the specified switches will be active in one position of the subcomponent (extended, retracted, open, closed, etc.). The switch that will not change state while attempting to operate the convertible top system, is the most likely area for attention.

OBDII Code B253E Dodge - Convertible Top Header Unlatch Limit Switch Circuit Low - AutoCodes.com — B253E Dodge Code - Convertible Top Header Unlatch Limit Switch Circuit Low

What does this mean?

What are the Possible Causes of the DTC B253E Dodge?

Faulty Header Unlatch Limit Switch
Header Unlatch Limit Switch harness is open or shorted
Header Unlatch Limit Switch circuit poor electrical connection
Faulty Power Top Control Module (PTCM)

How to Fix the DTC B253E Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B253E Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B253E Dodge code?

Need more information on how to fix the B253E Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B253E Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B253E Dodge Code

1. What are the common symptoms of OBDII code B253E in a Dodge convertible?

- The common symptoms include issues with the convertible top header unlatch mechanism, such as the top not unlatching properly or the convertible top not operating as expected.

2. What can cause the OBDII code B253E in a Dodge convertible related to the convertible top header unlatch limit switch circuit?

- The code B253E can be triggered by a fault in the convertible top header unlatch limit switch circuit, such as a short circuit, damaged wiring, or a malfunctioning limit switch.

3. How can I diagnose the convertible top header unlatch limit switch circuit low issue in my Dodge convertible?

- To diagnose the issue, you can use an OBDII scanner to read the fault code B253E. Additionally, inspect the wiring and connectors related to the convertible top header unlatch limit switch for any visible damage or corrosion.

4. What are some repair tips for fixing the convertible top header unlatch limit switch circuit low problem in a Dodge convertible?

- Repair tips may include checking and repairing any damaged wiring or connectors, replacing the faulty limit switch, and ensuring proper connection and functioning of the limit switch circuit.

5. Can I reset the OBDII code B253E in my Dodge convertible related to the convertible top header unlatch limit switch circuit low issue?

- Yes, you can reset the code using an OBDII scanner after addressing the underlying issue with the convertible top header unlatch limit switch circuit.

6. Is it safe to drive my Dodge convertible with the OBDII code B253E indicating an issue with the convertible top header unlatch limit switch circuit low?

- It is recommended not to drive the vehicle until the issue is diagnosed and repaired to prevent any further damage to the convertible top mechanism.

7. Can a DIY enthusiast repair the convertible top header unlatch limit switch circuit low problem in a Dodge convertible?

- Depending on the individual's skill level and experience with automotive repairs, some DIY enthusiasts may be able to address the issue by following repair guides or consulting with professionals for assistance.

8. What are the potential risks of ignoring the OBDII code B253E in a Dodge convertible related to the convertible top header unlatch limit switch circuit low?

- Ignoring the code can lead to continued malfunctioning of the convertible top mechanism, potential damage to other components, and safety concerns while operating the convertible.

9. How long does it typically take to repair the convertible top header unlatch limit switch circuit low issue in a Dodge convertible?

- The repair time can vary depending on the exact cause of the issue and the extent of repairs needed, but it may take a few hours to a full day to diagnose and fix the problem.

10. Are there any recalls or technical service bulletins related to the OBDII code B253E in Dodge convertibles concerning the convertible top header unlatch limit switch circuit low issue?

- It is advisable to check with Dodge dealerships or online resources for any relevant recalls or technical service bulletins related to this specific OBDII code to stay informed about potential manufacturer-acknowledged issues and solutions.