AutoCodes – Chrysler – B2529 Chrysler

B2529 Chrysler Code - Decklid Release Control Circuit Performance

Quick Answer

The Convertible Top is fairly typical of convertible tops. Common causes include Faulty Power Top Motor, Power Top Motor harness is open or shorted, Power Top Motor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B2529 Chrysler indicates Decklid Release Control Circuit Performance.
Common causes: Common causes include Faulty Power Top Motor, Power Top Motor harness is open or shorted, Power Top Motor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,415

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Dec 22, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B2529 Chrysler Description

The Convertible Top is fairly typical of convertible tops. There are three types of failures possible: Electrical failure (switches, wiring, motor, etc.), Hydraulic failure (fluid level low, leaks, pump internal, etc.), and Mechanical failure (binding roof, bent links, obstructions, etc.). Each type of failure mode will be rationalized by the power Top Control Module (PTCM) and labeled with a Diagnostic Trouble Code (DTC). The DTCs set by the PTCM can also be considered to have three types of failure modes:
1. Performance - These are time out DTCs, meaning the system timed out waiting for the next switch in sequence to change state. When the PTCM does not get the state change in the expected amount of time, it assumes something may be wrong and stops any further top operation in that direction. Typically the pump will run for 10 second before it times out.
2. Circuit Low - These DTCs set for a circuit that stays active at all times, meaning the signal circuit to the specified switch is continuously grounded. This could relate to a short to ground on the signal circuit, a sticking switch, or even a mechanical issue not allowing the switch to become inactive.
3. Correlation - These DTCs specifically relate two switches in a subcomponent (deck lid, tonneau drive, header latch, etc.) of the convertible top system. Both of the specified switches will be active in one position of the subcomponent (extended, retracted, open, closed, etc.). The switch that will not change state while attempting to operate the convertible top system, is the most likely area for attention.

OBDII Code B2529 Chrysler - Decklid Release Control Circuit Performance - AutoCodes.com — B2529 Chrysler Code - Decklid Release Control Circuit Performance

What does this mean?

What are the Possible Causes of the DTC B2529 Chrysler?

Faulty Power Top Motor
Power Top Motor harness is open or shorted
Power Top Motor circuit poor electrical connection
Faulty Power Top Control Module (PTCM)

How to Fix the DTC B2529 Chrysler?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B2529 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B2529 Chrysler code?

Need more information on how to fix the B2529 Chrysler code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B2529 Chrysler code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B2529 Chrysler Code

1. What are the common symptoms of OBDII code B2529 in a Chrysler related to the Decklid Release Control Circuit Performance?

The common symptoms include issues with the trunk not opening or closing properly, the trunk release button not working, or the trunk opening on its own unexpectedly.

2. What are the potential causes of the OBDII code B2529 in a Chrysler?

Possible causes of this code include faulty wiring or connectors in the decklid release control circuit, a malfunctioning decklid release switch, or a problem with the body control module.

3. How can I diagnose the OBDII code B2529 in my Chrysler?

Diagnosing this code typically involves inspecting the wiring and connectors in the decklid release control circuit, testing the decklid release switch for proper functionality, and using a diagnostic scanner to check for any stored fault codes in the body control module.

4. What are some repair tips for fixing OBDII code B2529 in a Chrysler?

Repair tips for this code may include repairing or replacing any damaged wiring or connectors in the decklid release control circuit, replacing a faulty decklid release switch, or reprogramming the body control module if necessary.

5. Can I still drive my Chrysler with the OBDII code B2529 present?

While it may be possible to drive your Chrysler with this code present, it's important to address the underlying issue promptly to ensure the proper operation of the decklid release system and avoid any potential safety hazards.

6. How much does it typically cost to repair OBDII code B2529 in a Chrysler?

The cost of repairing this code can vary depending on the specific cause of the issue and the extent of the repairs needed. It's advisable to consult with a qualified mechanic or dealership for an accurate cost estimate.

7. Is it possible to reset the OBDII code B2529 in a Chrysler without fixing the underlying issue?

Resetting the code without addressing the underlying problem may temporarily turn off the check engine light, but the issue will likely reoccur. It's best to diagnose and repair the root cause of the code to prevent further problems.

8. Can extreme weather conditions affect the occurrence of OBDII code B2529 in a Chrysler?

Extreme weather conditions, such as excessive heat or moisture, can potentially impact the performance of the decklid release control circuit and contribute to the triggering of this OBDII code.

9. Are there any preventative measures I can take to avoid OBDII code B2529 in my Chrysler?

Regularly inspecting the decklid release system for any signs of wear or damage, keeping the connectors clean and secure, and addressing any issues promptly can help prevent the occurrence of this OBDII code.

10. How long does it typically take to repair OBDII code B2529 in a Chrysler?

The repair time for this code can vary depending on the specific cause of the issue and the complexity of the repairs needed. In some cases, it may be a relatively quick fix, while in others, it could take more time to diagnose and repair.