B251A Chrysler Code - Right Rear Window Position Sensor 2 Circuit Performance
Quick Answer
The Power Top Control Module (PTCM) monitors the Right Rear Window Position Sensor 2 Circuit. Common causes include Faulty Right Rear Window Hall Sensor A, Right Rear Window Hall Sensor A harness is open or shorted, Right Rear Window Hall Sensor A circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B251A Chrysler indicates Right Rear Window Position Sensor 2 Circuit Performance.
- Common causes
- Common causes include Faulty Right Rear Window Hall Sensor A, Right Rear Window Hall Sensor A harness is open or shorted, Right Rear Window Hall Sensor A circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B251A Chrysler Description
What are the Possible Causes of the DTC B251A Chrysler?
- Faulty Right Rear Window Hall Sensor A
- Right Rear Window Hall Sensor A harness is open or shorted
- Right Rear Window Hall Sensor A circuit poor electrical connection
- Faulty Power Top Control Module (PTCM)
How to Fix the DTC B251A Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B251A Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B251A Chrysler code?
Need more information on how to fix the B251A Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B251A Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B251A Chrysler Code
1. What does the OBDII code B251A mean on a Chrysler vehicle?
The code B251A indicates a performance issue in the Right Rear Window Position Sensor 2 Circuit, which helps monitor the position of the rear passenger-side window.
2. What are the symptoms of the B251A code in a Chrysler?
Common symptoms include the right rear window not moving properly, irregular window operation, or no response when trying to open or close the window.
3. What causes the B251A code to appear?
The code can be triggered by a faulty window position sensor, damaged wiring or connectors, or issues with the window motor control module.
4. Can I still drive with the B251A code active?
Yes, the vehicle can still be driven, but the right rear window may not function correctly, which could be inconvenient or impact ventilation.
5. How can I diagnose the B251A code on my Chrysler?
Start by inspecting the wiring and connectors for damage or corrosion, then test the window position sensor and motor for proper operation using a multimeter or diagnostic tool.
6. What is the most common fix for the B251A code?
The most common fix is replacing a faulty window position sensor or repairing damaged wiring in the sensor circuit.
7. How much does it cost to repair the B251A code issue?
Repair costs can vary depending on the cause, but replacing a window position sensor typically costs $100 to $300, including parts and labor.
8. Can I clear the B251A code without fixing it?
You can clear the code with a scan tool, but it will likely return if the underlying issue isn’t resolved.
9. How long does it take to fix the B251A code?
Repairing the issue usually takes 1-2 hours, depending on the complexity of the problem and the availability of replacement parts.
10. Is it necessary to reprogram anything after fixing the B251A code?
In most cases, reprogramming isn’t required, but you may need to recalibrate the window position sensor to ensure proper operation.
Discuss the causes and fixes for B251A Chrysler OBDII Code
Code B251A Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
