AutoCodes – RAM – B250F RAM

B250F RAM Code - Right Power Sliding Door Latch Release Ratchet Primary Switch Performance

Quick Answer

The Right Rear Door Module monitors the Right Power Sliding Door Latch Release Ratchet Primary Switch Performance. Common causes include Binding Right Sliding Door Mechanism, Faulty Right Power Sliding Door Latch, Right Power Sliding Door Latch harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B250F RAM indicates Right Power Sliding Door Latch Release Ratchet Primary Switch Performance.
Common causes: Common causes include Binding Right Sliding Door Mechanism, Faulty Right Power Sliding Door Latch, Right Power Sliding Door Latch harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 466

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Dec 17, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B250F RAM Description

The Right Rear Door Module monitors the Right Power Sliding Door Latch Release Ratchet Primary Switch Performance. When the Right Rear Door Module senses the pawl switch was detected as grounded but the ratchet primary switch is unstable, this code will set.

OBDII Code B250F RAM - Right Power Sliding Door Latch Release Ratchet Primary Switch Performance - AutoCodes.com — B250F RAM Code - Right Power Sliding Door Latch Release Ratchet Primary Switch Performance

What does this mean?

What are the Possible Causes of the DTC B250F RAM?

Binding Right Sliding Door Mechanism
Faulty Right Power Sliding Door Latch
Right Power Sliding Door Latch harness is open or shorted
Right Power Sliding Door Latch circuit poor electrical connection
Faulty Right Rear Door Module

How to Fix the DTC B250F RAM?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B250F RAM code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B250F RAM code?

Need more information on how to fix the B250F RAM code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B250F RAM code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B250F RAM Code

1. What does the OBDII code B250F mean on a RAM vehicle?

The B250F code indicates an issue with the Right Power Sliding Door Latch Release Ratchet Primary Switch, specifically a performance problem.

2. What are common symptoms of the B250F code?

Symptoms may include the right power sliding door not opening or closing properly, unusual noises during operation, or the door being stuck in one position.

3. What causes the B250F code to appear?

The code can be caused by a faulty latch release ratchet primary switch, damaged wiring or connectors, or mechanical issues in the door latch assembly.

4. Can I drive my RAM vehicle with the B250F code?

Yes, the vehicle is still drivable, but the right sliding door may not function correctly, which could be inconvenient or potentially unsafe in certain situations.

5. How is the B250F code diagnosed?

A technician will inspect the door latch assembly, test the primary switch, and check for damaged wiring or poor connections using a diagnostic tool.

6. How do I fix the B250F code?

Repairs may include replacing the faulty latch release ratchet primary switch, repairing or replacing damaged wiring, or replacing the entire latch assembly if necessary.

7. What tools are needed to repair the B250F code?

Basic hand tools, a multimeter for checking wiring continuity, and an OBDII scanner to clear the code after repairs are completed.

8. How much does it cost to repair the B250F code?

Repair costs can vary but typically range from $150 to $400, depending on whether only the switch needs replacing or the entire latch assembly.

9. Can the B250F code be caused by a software issue?

While unlikely, in rare cases, a software issue or corrupted firmware in the door control module could contribute to the problem.

10. How can I prevent the B250F code from occurring again?

Regularly inspect and maintain the sliding door components, keep the tracks and latch mechanism clean, and address any abnormal door operation promptly to prevent further damage.