AutoCodes – RAM – B250A RAM

B250A RAM Code - Right Power Sliding Door Latch Cinch Overcurrent

Quick Answer

The Right Rear Door Module monitors the Right Power Sliding Door Latch Cinch Overcurrent. Common causes include Binding Right Sliding Door Mechanism, Faulty Right Power Sliding Door Latch, Right Power Sliding Door Latch harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B250A RAM indicates Right Power Sliding Door Latch Cinch Overcurrent.
Common causes: Common causes include Binding Right Sliding Door Mechanism, Faulty Right Power Sliding Door Latch, Right Power Sliding Door Latch harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 461

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Dec 17, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B250A RAM Description

The Right Rear Door Module monitors the Right Power Sliding Door Latch Cinch Overcurrent. When the Right Rear Door Module senses the latch motor stall current of 6.5 amps has been detected for over 150ms, with no pawl or ratchet failure this code will set.

OBDII Code B250A RAM - Right Power Sliding Door Latch Cinch Overcurrent - AutoCodes.com — B250A RAM Code - Right Power Sliding Door Latch Cinch Overcurrent

What does this mean?

What are the Possible Causes of the DTC B250A RAM?

Binding Right Sliding Door Mechanism
Faulty Right Power Sliding Door Latch
Right Power Sliding Door Latch harness is open or shorted
Right Power Sliding Door Latch circuit poor electrical connection
Faulty Right Rear Door Module

How to Fix the DTC B250A RAM?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B250A RAM code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B250A RAM code?

Need more information on how to fix the B250A RAM code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B250A RAM code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B250A RAM Code

What does the OBDII code B250A RAM indicate?

The code B250A indicates that there is an overcurrent issue with the right power sliding door latch cinch mechanism, which may affect the operation of the sliding door.

What are common symptoms of the B250A code?

Common symptoms may include the right sliding door failing to open or close properly, unusual noises from the latch area, and warning lights on the dashboard related to the sliding door system.

What could cause the B250A code to trigger?

Possible causes include a malfunctioning latch motor, wiring issues, a short circuit in the latch circuitry, or a faulty body control module.

How can I diagnose the issue related to the B250A code?

To diagnose the issue, check the wiring and connectors for damage, test the latch motor for proper operation, and use a multimeter to measure voltage and current in the latch circuit.

Can I repair the B250A code myself?

If you have experience with automotive electrical systems, you may be able to repair it yourself by inspecting and repairing wiring or replacing the latch motor. However, if you're unsure, it's best to consult a professional.

What parts may need to be replaced to fix the B250A code?

Potential parts that may need replacement include the right power sliding door latch assembly, wiring harness, or the body control module, depending on the root cause of the issue.

Is it safe to drive with the B250A code present?

While it may be safe to drive, the malfunctioning sliding door could pose a safety risk, especially if it opens unexpectedly. It's advisable to address the issue as soon as possible.

How can I clear the B250A code after repairs?

You can clear the B250A code using an OBDII scanner to reset the trouble codes after completing the necessary repairs.

Will ignoring the B250A code cause further damage?

Yes, ignoring the B250A code could lead to further damage to the sliding door system or other related components, potentially resulting in more costly repairs down the line.