AutoCodesRAM – B2506 RAM

B2506 RAM Code - Left Power Sliding Door Latch Cinch Sector Switch Performance

Quick Answer

The Left Rear Door Module monitors the Left Power Sliding Door Latch Cinch Sector Switch Performance. Common causes include Binding Left Sliding Door Mechanism, Faulty Left Power Sliding Door Latch, Left Power Sliding Door Latch harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B2506 RAM indicates Left Power Sliding Door Latch Cinch Sector Switch Performance.
Common causes
Common causes include Binding Left Sliding Door Mechanism, Faulty Left Power Sliding Door Latch, Left Power Sliding Door Latch harness is open or shorted.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 493
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Dec 17, 2019
💬 Need more help? Ask Coddy for instant answers — it's free!

Code B2506 RAM Description

The Left Rear Door Module monitors the Left Power Sliding Door Latch Cinch Sector Switch Performance. When the Left Rear Door Module senses the sector switch is unstable during a cinching operation, this code will set.
OBDII Code B2506 RAM - Left Power Sliding Door Latch Cinch Sector Switch Performance - AutoCodes.com
B2506 RAM Code - Left Power Sliding Door Latch Cinch Sector Switch Performance

What are the Possible Causes of the DTC B2506 RAM?

  • Binding Left Sliding Door Mechanism
  • Faulty Left Power Sliding Door Latch
  • Left Power Sliding Door Latch harness is open or shorted
  • Left Power Sliding Door Latch circuit poor electrical connection
  • Faulty Left Rear Door Module

How to Fix the DTC B2506 RAM?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B2506 RAM code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B2506 RAM code?

Need more information on how to fix the B2506 RAM code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B2506 RAM code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B2506 RAM Code

1. What does OBDII code B2506 mean on a RAM vehicle?

Code B2506 indicates an issue with the Left Power Sliding Door Latch Cinch Sector Switch, where its performance is outside the expected range.

2. What are the common symptoms of code B2506?

Symptoms include the left power sliding door not latching properly, failing to close completely, or making unusual noises during operation.

3. What causes code B2506 to trigger?

Common causes include a faulty cinch sector switch, damaged wiring or connectors, misaligned door components, or debris obstructing the latch mechanism.

4. Can I still drive my vehicle with code B2506 active?

Yes, you can drive the vehicle, but the left power sliding door may not function correctly, which could pose a safety concern.

5. How do I diagnose B2506 on a RAM vehicle?

Start by inspecting the wiring and connectors to the latch cinch sector switch for damage or corrosion, then check the switch itself for proper function.

6. How can I fix code B2506?

Repairs may involve replacing the cinch sector switch, repairing damaged wiring, clearing debris from the latch mechanism, or adjusting the door alignment.

7. How much does it cost to fix code B2506?

Repair costs can vary, but replacing the latch cinch sector switch typically costs between $100 and $300, depending on labor rates and part prices.

8. Can I reset code B2506 without repairs?

You can clear the code with an OBDII scanner, but if the underlying issue isn't resolved, the code is likely to return.

9. Is B2506 a common issue in RAM vehicles?

It’s not extremely common but can occur in vehicles with power sliding doors, especially if the door mechanism is frequently used or exposed to harsh conditions.

10. What tools do I need to troubleshoot code B2506?

You’ll need an OBDII scanner, a multimeter to check electrical connections, and basic hand tools to access the door mechanism.

Discuss the causes and fixes for B2506 RAM OBDII Code

Code B2506 RAM comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play