AutoCodes – Generic – B2476:59

B2476:59 Code - Cellular Phone Select Service Switch Protection Time-out

Quick Answer

The OnStar® button assembly consists of 3 buttons: Call/Answer, OnStar® Call Center, and OnStar® Emergency. Common causes include Faulty Inside Rearview Mirror, Inside Rearview Mirror harness is open or shorted, Inside Rearview Mirror circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B2476:59 indicates Cellular Phone Select Service Switch Protection Time-out.
Common causes: Common causes include Faulty Inside Rearview Mirror, Inside Rearview Mirror harness is open or shorted, Inside Rearview Mirror circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 298

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 01, 2023

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B2476:59 Description

The OnStar® button assembly consists of 3 buttons: Call/Answer, OnStar® Call Center, and OnStar® Emergency. The Telematics Communication Interface Control Module supplies the OnStar® button assembly with 10 V via the 10 V reference circuit. When pressed, each button completes the circuit across a resistor or set of resistors allowing a specific voltage to be returned to the Telematics Communication Interface Control Module over the signal circuit. Depending upon the voltage range returned, the Telematics Communication Interface Control Module is able to identify which button has been pressed. The Diagnostic Trouble Code (DTC) will be set when the Telematics Communication Interface Control Module detects a valid signal on the keypad signal circuit for longer than 15 s. If one of the OnStar® buttons is held or stuck for 15 s or greater, the telematics communication interface control module will set this DTC.

OBDII Code B2476:59 - Cellular Phone Select Service Switch Protection Time-out - AutoCodes.com — B2476:59 Code - Cellular Phone Select Service Switch Protection Time-out

What does this mean?

What are the Possible Causes of the DTC B2476:59?

Faulty Inside Rearview Mirror
Inside Rearview Mirror harness is open or shorted
Inside Rearview Mirror circuit poor electrical connection
Faulty Telematics Communication Interface Control Module

How to Fix the DTC B2476:59?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B2476:04 Cellular Phone Select Service Switch Open
B2476:59 Cellular Phone Select Service Switch Protection Time-out

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B2476:59 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B2476:59 code?

Need more information on how to fix the B2476:59 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B2476:59 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.