B23C1 Dodge Code - Stop/Start Disable Switch 2 Circuit Low
Quick Answer
The Powertrain Control Module (PCM) monitors the Stop/Start Disable Switch 2 Circuit. Common causes include Faulty Switch Bank Module, Switch Bank Module harness is open or shorted, Switch Bank Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B23C1 Dodge indicates Stop/Start Disable Switch 2 Circuit Low.
- Common causes
- Common causes include Faulty Switch Bank Module, Switch Bank Module harness is open or shorted, Switch Bank Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B23C1 Dodge Description
What are the Possible Causes of the DTC B23C1 Dodge?
- Faulty Switch Bank Module
- Switch Bank Module harness is open or shorted
- Switch Bank Module circuit poor electrical connection
- Faulty Body Control Module (BCM)
How to Fix the DTC B23C1 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B23C1 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B23C1 Dodge code?
Need more information on how to fix the B23C1 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B23C1 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B23C1 Dodge Code
1. What are the common symptoms of OBDII code B23C1 (Dodge) - Stop/Start Disable Switch 2 Circuit Low?
The common symptoms include the stop/start system not functioning properly, the "Stop/Start" light illuminating on the dashboard, and potential issues with the vehicle's battery.
2. What are the possible causes of OBDII code B23C1 (Dodge) - Stop/Start Disable Switch 2 Circuit Low?
Possible causes include a faulty stop/start disable switch, damaged wiring or connectors in the circuit, a malfunctioning control module, or a software issue.
3. How can I diagnose the OBDII code B23C1 (Dodge) - Stop/Start Disable Switch 2 Circuit Low?
Diagnosing this code involves checking the stop/start disable switch for proper operation, inspecting the wiring and connectors for any damage, and using a diagnostic scanner to read the code and determine the specific issue.
4. Can I still drive my vehicle with the OBDII code B23C1 (Dodge) - Stop/Start Disable Switch 2 Circuit Low?
While it may be safe to drive the vehicle with this code, it is recommended to have the issue diagnosed and repaired as soon as possible to prevent any potential long-term damage or further complications.
5. How can I repair OBDII code B23C1 (Dodge) - Stop/Start Disable Switch 2 Circuit Low?
Repairing this code may involve replacing the faulty stop/start disable switch, repairing any damaged wiring or connectors, reprogramming the control module if necessary, and clearing the code with a diagnostic scanner.
6. Is it possible to reset OBDII code B23C1 (Dodge) - Stop/Start Disable Switch 2 Circuit Low without fixing the underlying issue?
While clearing the code may temporarily turn off the check engine light, the underlying issue causing the code will persist until properly diagnosed and repaired. Resetting the code without addressing the problem will likely result in the code reappearing.
7. Will OBDII code B23C1 (Dodge) - Stop/Start Disable Switch 2 Circuit Low cause any damage to my vehicle if left untreated?
Leaving this code untreated could potentially lead to further complications with the stop/start system, increased fuel consumption, or draining the vehicle's battery. It is best to address the issue promptly to prevent any long-term damage.
8. Can a DIY enthusiast repair OBDII code B23C1 (Dodge) - Stop/Start Disable Switch 2 Circuit Low?
Depending on their skill level and access to tools, a DIY enthusiast may be able to repair this code by following the recommended diagnostic and repair procedures. However, if unsure, it is best to consult a professional mechanic for assistance.
9. How long does it typically take to repair OBDII code B23C1 (Dodge) - Stop/Start Disable Switch 2 Circuit Low?
The repair time can vary depending on the specific cause of the code and the complexity of the repair. It may take anywhere from 1-3 hours to diagnose and fix the issue, but this can vary based on the technician's experience and the availability of parts.
10. Are there any recalls or technical service bulletins related to OBDII code B23C1 (Dodge) - Stop/Start Disable Switch 2 Circuit Low?
It's recommended to check with your local Dodge dealership or visit the National Highway Traffic Safety Administration (NHTSA) website to see if there are any recalls or technical service bulletins related to this specific OBDII code.
Discuss the causes and fixes for B23C1 Dodge OBDII Code
Code B23C1 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
