AutoCodes – Buick – B2365 Buick

B2365 Buick Code - Driver Seat Rear Vertical Position Sensor Circuit

Quick Answer

The Seat Memory Control Module monitors the position of the seat motors by using hall effect position sensors which are an internal part of each motor. Common causes include Faulty Driver Seat Rear Vertical Motor, Driver Seat Rear Vertical Motor harness is open or shorted, Driver Seat Rear Vertical Motor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B2365 Buick indicates Driver Seat Rear Vertical Position Sensor Circuit.
Common causes: Common causes include Faulty Driver Seat Rear Vertical Motor, Driver Seat Rear Vertical Motor harness is open or shorted, Driver Seat Rear Vertical Motor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 694

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 17, 2023

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B2365 Buick Description

The Seat Memory Control Module monitors the position of the seat motors by using hall effect position sensors which are an internal part of each motor. The module supplies each sensor with a 12 V reference circuit only when any seat motor is active, and a low side signal circuit. During seat motor operation, the hall effect position sensor provides a determined number of pulse signals for every revolution of the motor shaft. The scan tool displays these pulse signals as counts that range from 0–65,535. The module counts the feedback pulses from each sensor to determine seat position and end-of-travel limits for each of the seat motors. High scan tool count values indicate forward or upward seat positions while low count values indicate rearward or downward seat positions. The Diagnostic Trouble Code (DTC) will be set when there is a fault in the Driver Seat Rear Vertical Position Sensor Circuit.

OBDII Code B2365 Buick - Driver Seat Rear Vertical Position Sensor Circuit - AutoCodes.com — B2365 Buick Code - Driver Seat Rear Vertical Position Sensor Circuit

What does this mean?

What are the Possible Causes of the DTC B2365 Buick?

Faulty Driver Seat Rear Vertical Motor
Driver Seat Rear Vertical Motor harness is open or shorted
Driver Seat Rear Vertical Motor circuit poor electrical connection
Faulty Driver Seat Memory Control Module

How to Fix the DTC B2365 Buick?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B2365:01 Driver Seat Rear Vertical Position Sensor Circuit Short to Battery
B2365:02 Driver Seat Rear Vertical Position Sensor Circuit Short to Ground
B2365:06 Driver Seat Rear Vertical Position Sensor Circuit Low Voltage/Open

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B2365 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B2365 Buick code?

Need more information on how to fix the B2365 Buick code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B2365 Buick code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B2365 Buick Code

1. What does the OBDII code B2365 mean in a Buick?

B2365 indicates an issue with the Driver Seat Rear Vertical Position Sensor Circuit, which monitors and controls the vertical adjustment of the rear portion of the driver seat.

2. What are common symptoms of code B2365 in a Buick?

Symptoms may include improper seat height adjustment, unresponsiveness of the seat controls, or the seat being stuck in one position.

3. What causes the B2365 code to appear?

Common causes include a faulty vertical position sensor, damaged wiring or connectors in the circuit, or a malfunctioning seat control module.

4. How can I diagnose the B2365 code?

Start by inspecting the wiring and connectors near the seat for damage or corrosion, then test the vertical position sensor and seat control module for proper functionality.

5. Can I still drive my Buick with the B2365 code?

Yes, the vehicle is still drivable, but the driver seat adjustment may be limited or not functional, which could affect comfort and safety.

6. How do I fix the B2365 code on my Buick?

Repairs may involve replacing the vertical position sensor, repairing or replacing damaged wiring, or reprogramming or replacing the seat control module.

7. How much does it cost to fix code B2365?

The repair cost can vary but typically ranges from $100 to $300, depending on whether the sensor, wiring, or control module requires replacement.

8. Can a B2365 code trigger the airbag warning light?

No, the B2365 code is related to seat position adjustment and does not directly impact the airbag system.

9. Will clearing the code fix the problem?

Clearing the code may temporarily remove it, but if the underlying issue is not addressed, the code will likely return.

10. Is it safe to ignore the B2365 code?

While it may not affect drivability, ignoring the code could lead to further mechanical issues with the seat adjustment system over time. Itâ€™s best to address the problem promptly.