AutoCodes – Dodge – B235A Dodge

B235A Dodge Code - ECU In Plant Mode Activate

Quick Answer

This code is normally displayed when the Power Folding Seat is in it's stored mode prior to being installed into a vehicle. Common causes include Folding Seat not activated during installation, Faulty Folding Seat Module, Faulty Power Folding Seat. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B235A Dodge indicates ECU In Plant Mode Activate.
Common causes: Common causes include Folding Seat not activated during installation, Faulty Folding Seat Module, Faulty Power Folding Seat.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 790

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Dec 04, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B235A Dodge Description

This code is normally displayed when the Power Folding Seat is in it's stored mode prior to being installed into a vehicle.

OBDII Code B235A Dodge - ECU In Plant Mode Activate - AutoCodes.com — B235A Dodge Code - ECU In Plant Mode Activate

What does this mean?

What are the Possible Causes of the DTC B235A Dodge?

Folding Seat not activated during installation
Faulty Folding Seat Module
Faulty Power Folding Seat
Power Folding Seat harness is open or shorted
Power Folding Seat circuit poor electrical connection

How to Fix the DTC B235A Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B235A Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B235A Dodge code?

Need more information on how to fix the B235A Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B235A Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B235A Dodge Code

1. What are the common symptoms of OBDII code B235A in a Dodge, indicating the ECU In Plant Mode Activate issue?

- Common symptoms include engine stalling, rough idle, reduced power, and difficulty starting the vehicle.

2. What causes the ECU In Plant Mode Activate issue (code B235A) in Dodge vehicles?

- This issue is often caused by a communication error between the ECU and other control modules in the vehicle's network.

3. How can I diagnose the ECU In Plant Mode Activate problem in my Dodge when the B235A code is triggered?

- Using a diagnostic scanner capable of reading manufacturer-specific codes can help identify the exact source of the communication error.

4. Can a faulty sensor or wiring issue trigger the B235A code in a Dodge vehicle?

- Yes, a faulty sensor or wiring issue can disrupt communication between the ECU and other modules, leading to the activation of Plant Mode.

5. Is it safe to drive my Dodge when the ECU is in Plant Mode Activate due to code B235A?

- It is not recommended to drive the vehicle in this condition as it may lead to further damage or unsafe driving conditions.

6. What are some repair tips for resolving the ECU In Plant Mode Activate issue in a Dodge?

- Start by checking and repairing any damaged wiring, ensuring all sensors are functioning correctly, and then resetting the ECU to clear the code.

7. Can resetting the ECU resolve the B235A code and deactivate Plant Mode in a Dodge?

- Resetting the ECU can sometimes clear the code and deactivate Plant Mode, but if the underlying issue persists, the code may reappear.

8. How much does it typically cost to repair the ECU In Plant Mode Activate issue in a Dodge?

- The cost of repair can vary depending on the exact cause of the issue, but it may involve labor costs for diagnostics and potentially replacing faulty components.

9. Are there any software updates available from Dodge to address the B235A code and ECU Plant Mode Activate issue?

- Contacting a Dodge dealership or authorized service center can help determine if there are any software updates available to address this specific issue.

10. Can a DIY enthusiast without advanced automotive knowledge fix the ECU In Plant Mode Activate problem triggered by code B235A in a Dodge?

- While some basic troubleshooting and repairs may be possible for DIY enthusiasts, resolving complex ECU communication issues may require professional expertise and specialized tools.