AutoCodes – RAM – B232E RAM

B232E RAM Code - Rear Washer Switch Stuck

Quick Answer

The Wiper/Washer Switch is integral to the Multifunction Switch. Common causes include Faulty Multifunction Switch, Multifunction Switch harness is open or shorted, Multifunction Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B232E RAM indicates Rear Washer Switch Stuck.
Common causes: Common causes include Faulty Multifunction Switch, Multifunction Switch harness is open or shorted, Multifunction Switch circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 617

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Nov 08, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B232E RAM Description

The Wiper/Washer Switch is integral to the Multifunction Switch. The Multifunction Switch is connected to the left side of the Clockspring/SAS. The Multifunction switch provides the primary controls for the front wiper/rear wiper/washer systems, turn signals and for headlamp high beam selection. The Multifunction Switch communicates with the Steering Angle Sensor (SAS) (integral to the Steering Column Control Module) via the LIN Bus. The SAS then converts this data to a CAN Bus signal and broadcasts the message to the corresponding module on the bus.

OBDII Code B232E RAM - Rear Washer Switch Stuck - AutoCodes.com — B232E RAM Code - Rear Washer Switch Stuck

What does this mean?

What are the Possible Causes of the DTC B232E RAM?

Faulty Multifunction Switch
Multifunction Switch harness is open or shorted
Multifunction Switch circuit poor electrical connection

How to Fix the DTC B232E RAM?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B232E RAM code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B232E RAM code?

Need more information on how to fix the B232E RAM code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B232E RAM code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B232E RAM Code

1. What are the common symptoms of OBDII code B232E RAM related to the Rear Washer Switch Stuck?

- The common symptoms include the rear washer switch being unresponsive or stuck in one position, resulting in the rear washer not functioning properly.

2. What could cause the Rear Washer Switch to get stuck and trigger code B232E RAM?

- The switch may get stuck due to debris, dirt, or corrosion affecting its movement, or there could be an electrical issue within the switch itself.

3. How can I diagnose the Rear Washer Switch issue causing code B232E RAM?

- Start by checking the condition of the switch for any visible obstructions. Test the switch using a multimeter to determine if it is functioning correctly or if there is an electrical problem.

4. What are some repair tips to fix the Rear Washer Switch Stuck issue associated with code B232E RAM?

- Cleaning the switch contacts, lubricating the switch mechanism, or replacing the switch entirely can help resolve the issue. Ensure the electrical connections are secure and free of any corrosion.

5. Can a DIY enthusiast fix the Rear Washer Switch Stuck problem triggering code B232E RAM?

- Depending on the individual's skill level and access to tools, a DIY enthusiast may be able to resolve the issue by following repair guides or tutorials specific to their vehicle model.

6. Is it safe to drive with OBDII code B232E RAM related to the Rear Washer Switch Stuck?

- While the issue may not directly affect the drivability of the vehicle, it is essential to address it promptly to ensure the rear washer system functions correctly, especially in adverse weather conditions.

7. Will resetting the OBDII code B232E RAM make the Rear Washer Switch work again?

- Resetting the code may temporarily clear the error code, but it will not fix the underlying issue causing the Rear Washer Switch to get stuck. Proper diagnosis and repair are necessary.

8. How can I prevent the Rear Washer Switch from getting stuck and triggering code B232E RAM in the future?

- Regularly cleaning the switch, keeping it free of debris, and addressing any electrical issues promptly can help prevent the switch from getting stuck in the future.

9. Are there any recalls or technical service bulletins related to OBDII code B232E RAM and the Rear Washer Switch Stuck?

- It is advisable to check with the vehicle manufacturer or authorized service centers for any recalls or technical service bulletins related to this specific OBDII code and issue.

10. Can a faulty Rear Washer Pump also trigger OBDII code B232E RAM?

- While the code is specifically related to the Rear Washer Switch, a faulty Rear Washer Pump can also cause issues with the rear washer system, but it would likely trigger a different OBDII code.