AutoCodes – Chrysler – B232E Chrysler

B232E Chrysler Code - Rear Washer Switch Stuck

Quick Answer

The Wiper/Washer Switch is integral to the Multifunction Switch. Common causes include Faulty Multifunction Switch, Multifunction Switch harness is open or shorted, Multifunction Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B232E Chrysler indicates Rear Washer Switch Stuck.
Common causes: Common causes include Faulty Multifunction Switch, Multifunction Switch harness is open or shorted, Multifunction Switch circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 562

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Nov 08, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B232E Chrysler Description

The Wiper/Washer Switch is integral to the Multifunction Switch. The Multifunction Switch is connected to the left side of the Clockspring/SAS. The Multifunction switch provides the primary controls for the front wiper/rear wiper/washer systems, turn signals and for headlamp high beam selection. The Multifunction Switch communicates with the Steering Angle Sensor (SAS) (integral to the Steering Column Control Module) via the LIN Bus. The SAS then converts this data to a CAN Bus signal and broadcasts the message to the corresponding module on the bus.

OBDII Code B232E Chrysler - Rear Washer Switch Stuck - AutoCodes.com — B232E Chrysler Code - Rear Washer Switch Stuck

What does this mean?

What are the Possible Causes of the DTC B232E Chrysler?

Faulty Multifunction Switch
Multifunction Switch harness is open or shorted
Multifunction Switch circuit poor electrical connection

How to Fix the DTC B232E Chrysler?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B232E Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B232E Chrysler code?

Need more information on how to fix the B232E Chrysler code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B232E Chrysler code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B232E Chrysler Code

1. What are the common symptoms of OBDII code B232E in a Chrysler related to the rear washer switch being stuck?

The common symptoms include the rear washer not working when the switch is activated, even though the fluid reservoir is full.

2. What can cause the rear washer switch to become stuck and trigger code B232E in a Chrysler?

The most common cause is a faulty rear washer switch or a problem with the wiring connected to the switch.

3. How can I diagnose the rear washer switch issue triggering code B232E in my Chrysler?

You can start by checking the rear washer switch for physical damage or signs of wear. Testing the switch's functionality with a multimeter can also help determine if it is faulty.

4. Is it possible to repair the stuck rear washer switch causing OBDII code B232E in a Chrysler?

In many cases, yes. Depending on the issue, you may be able to repair the switch by cleaning it, adjusting its position, or replacing it with a new one.

5. Can I reset the OBDII code B232E related to the stuck rear washer switch in my Chrysler without fixing the issue?

Resetting the code without addressing the root cause will likely result in the code reappearing once the system detects the problem again. It's best to diagnose and fix the issue to prevent code recurrence.

6. Are there any temporary solutions to bypass the stuck rear washer switch issue linked to code B232E in a Chrysler?

While it's not recommended, you could temporarily disconnect the rear washer switch to stop the code from appearing. However, this is not a permanent solution and may affect the functionality of the rear washer system.

7. What tools or equipment might I need to repair the rear washer switch issue causing OBDII code B232E in my Chrysler?

Common tools include a multimeter for testing electrical components, screwdrivers for removing panels, and replacement parts such as a new rear washer switch if needed.

8. How critical is it to address the stuck rear washer switch issue triggering code B232E in a Chrysler promptly?

While the issue may seem minor, it's essential to address it promptly to ensure the proper functioning of the rear washer system, especially in situations where visibility through the rear windshield is crucial.

9. Can a DIY enthusiast with basic automotive knowledge fix the stuck rear washer switch problem leading to OBDII code B232E in a Chrysler?

Yes, with the right tools and guidance, a DIY enthusiast with basic automotive knowledge should be able to diagnose and repair the rear washer switch issue causing code B232E in a Chrysler.

10. Is it advisable to seek professional help for troubleshooting and repairing the rear washer switch problem associated with OBDII code B232E in a Chrysler?

If you are unsure about diagnosing or fixing the issue yourself, or if the problem seems complex, it's recommended to seek professional help from a qualified mechanic or automotive technician to ensure the problem is resolved correctly.