Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
The cost of diagnosing the B2326 code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Under normal operation, the exterior mirror control switch receives power and ground from the circuit. The exterior mirror control switch uses circuits to send input signals to the Driver Door Module (DDM). The DDM controls the Left (LH) exterior mirror motor movement by supplying the appropriate power and ground to circuits. The DDM communicates with the Driver Seat Module (DSM) through the Medium-Speed Controller Area Network (MS-CAN) whenever the DDM receives an input signal from the exterior mirror control switch for the Right (RH) mirror. The DSM controls the RH exterior mirror motor movement by supplying the appropriate power and ground.
The memory mirror system uses feedback potentiometers, located in the LH and RH exterior mirrors, in order to track the movement of the LH and RH exterior mirror motors. The DDM supplies the LH and RH exterior mirror feedback potentiometer reference voltage and ground through circuits. The DDM receives feedback from the LH and RH exterior mirror feedback potentiometer through left/right and up/down circuits.
Need more information on how to fix the B2326 code? Get Access to Factory Service Manuals
Get the B2326 code diagnosed by a professional: Find a repair shop in your area
Help us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the B2326 code? Have you replaced any parts?
Any information is appreciated. Thanks