B2324 Mercury Code - Mirror Driver Vertical Feedback Potentiometer Circuit Failure
Quick Answer
Under normal operation, the exterior mirror control switch receives power and ground from the circuit. Common causes include Faulty Driver Exterior Mirror, Driver Exterior Mirror harness is open or shorted, Driver Exterior Mirror circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2324 Mercury indicates Mirror Driver Vertical Feedback Potentiometer Circuit Failure.
- Common causes
- Common causes include Faulty Driver Exterior Mirror, Driver Exterior Mirror harness is open or shorted, Driver Exterior Mirror circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B2324 Mercury Description
The memory mirror system uses feedback potentiometers, located in the LH and RH exterior mirrors, in order to track the movement of the LH and RH exterior mirror motors. The DDM supplies the LH and RH exterior mirror feedback potentiometer reference voltage and ground through circuits. The DDM receives feedback from the LH and RH exterior mirror feedback potentiometer through left/right and up/down circuits.
What are the Possible Causes of the DTC B2324 Mercury?
- Faulty Driver Exterior Mirror
- Driver Exterior Mirror harness is open or shorted
- Driver Exterior Mirror circuit poor electrical connection
- Faulty Driver Exterior Mirror Control Switch
- Faulty Driver Door Module (DDM)
- Faulty Driver Seat Module (DSM)
How to Fix the DTC B2324 Mercury?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B2324 Mercury code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B2324 Mercury code?
Need more information on how to fix the B2324 Mercury code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2324 Mercury code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B2324 Mercury Code
1. What does the OBDII code B2324 mean on a Mercury vehicle?
The code B2324 indicates a failure in the Mirror Driver Vertical Feedback Potentiometer Circuit, which is responsible for monitoring the vertical adjustment of the side mirror.
2. What are the common symptoms of the B2324 code?
Symptoms may include the side mirror not adjusting vertically, unresponsive mirror controls, or a stored trouble code without noticeable mirror issues.
3. What causes the B2324 code to appear?
Common causes include a faulty mirror motor, damaged wiring or connections in the circuit, or a malfunctioning potentiometer within the mirror assembly.
4. Can the B2324 code affect other vehicle functions?
Typically, this code only affects the mirror adjustment system and does not impact other vehicle functions.
5. How can I diagnose the B2324 code?
Start by inspecting the mirror wiring and connectors for damage or corrosion. Then, test the mirror motor and potentiometer for proper functionality using a multimeter.
6. Is it safe to drive with the B2324 code active?
Yes, it is generally safe to drive, but you may experience inconvenience due to the inability to adjust the side mirror vertically.
7. How do you fix the B2324 code on a Mercury vehicle?
Repairs may include replacing the mirror motor, repairing damaged wiring, or replacing the side mirror assembly if the potentiometer is non-replaceable.
8. How much does it cost to fix the B2324 code?
Costs vary depending on whether you need to repair wiring or replace the mirror assembly, typically ranging from $100 to $400, including parts and labor.
9. Can I clear the B2324 code without fixing the issue?
You can clear the code with an OBDII scanner, but it will likely return if the underlying issue is not resolved.
10. Do I need professional help to fix the B2324 code?
If you're comfortable working with vehicle electronics and diagnosing wiring issues, you may attempt the repair yourself. Otherwise, it’s best to consult a professional mechanic.
Discuss the causes and fixes for B2324 Mercury OBDII Code
Code B2324 Mercury comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
