B2319 Jeep Code - Wiper Hi/Low Control Circuit Open
Quick Answer
The Totally Integrated Power Module (TIPM) monitors the Wiper On/Off Control Circuit. Common causes include Faulty Wiper Hi/Low Relay, Wiper Hi/Low Relay harness is open or shorted, Wiper Hi/Low Relay circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2319 Jeep indicates Wiper Hi/Low Control Circuit Open.
- Common causes
- Common causes include Faulty Wiper Hi/Low Relay, Wiper Hi/Low Relay harness is open or shorted, Wiper Hi/Low Relay circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B2319 Jeep Description
What are the Possible Causes of the DTC B2319 Jeep?
- Faulty Wiper Hi/Low Relay
- Wiper Hi/Low Relay harness is open or shorted
- Wiper Hi/Low Relay circuit poor electrical connection
- Faulty Totally Integrated Power Module (TIPM)
How to Fix the DTC B2319 Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B2319 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B2319 Jeep code?
Need more information on how to fix the B2319 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2319 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B2319 Jeep Code
1. What does the OBDII code B2319 mean on a Jeep?
B2319 indicates a problem with the Wiper Hi/Low Control Circuit, specifically an open circuit that affects the functionality of the windshield wipers.
2. What are the common symptoms of code B2319?
Symptoms include windshield wipers not operating at high or low speeds, wipers stuck at one speed, or wipers not functioning at all.
3. What causes the B2319 code to appear?
Common causes include a damaged wiper motor, faulty wiper switch, corroded or loose wiring, or a blown fuse in the wiper control circuit.
4. How can I diagnose the B2319 code?
Diagnosis involves visually inspecting the wiper motor, switch, and wiring for damage or corrosion, and using a multimeter to test for continuity and voltage in the wiper circuit.
5. Can a blown fuse trigger the B2319 code?
Yes, a blown fuse in the wiper control circuit can lead to an open circuit and trigger the B2319 code.
6. Is it safe to drive with the B2319 code active?
It’s unsafe to drive in conditions requiring windshield wiper use, as impaired wiper function can significantly reduce visibility.
7. How do I fix the B2319 code on my Jeep?
Repairs may include replacing the wiper motor, repairing or replacing damaged wiring, ensuring all connections are secure, or replacing the wiper switch if faulty.
8. Can a faulty wiper relay cause the B2319 code?
Yes, a faulty wiper relay can disrupt the high/low control circuit and trigger the code.
9. How much does it cost to fix the B2319 code?
Repair costs vary but typically range from $100 to $400 depending on whether the issue is a damaged wiper motor, wiring, or switch.
10. Can I clear the B2319 code without fixing the issue?
You can clear the code with an OBDII scanner, but it will likely return unless the underlying issue is resolved.
Discuss the causes and fixes for B2319 Jeep OBDII Code
Code B2319 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
