AutoCodes – Dodge – B2319 Dodge

B2319 Dodge Code - Wiper Hi/Low Control Circuit Open

Quick Answer

The Totally Integrated Power Module (TIPM) monitors the Wiper On/Off Control Circuit. Common causes include Faulty Wiper Hi/Low Relay, Wiper Hi/Low Relay harness is open or shorted, Wiper Hi/Low Relay circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B2319 Dodge indicates Wiper Hi/Low Control Circuit Open.
Common causes: Common causes include Faulty Wiper Hi/Low Relay, Wiper Hi/Low Relay harness is open or shorted, Wiper Hi/Low Relay circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,061

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Nov 07, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B2319 Dodge Description

The Totally Integrated Power Module (TIPM) monitors the Wiper On/Off Control Circuit. The Diagnostic Trouble Code (DTC) sets when the TIPM detects a short/low condition.

OBDII Code B2319 Dodge - Wiper Hi/Low Control Circuit Open - AutoCodes.com — B2319 Dodge Code - Wiper Hi/Low Control Circuit Open

What does this mean?

What are the Possible Causes of the DTC B2319 Dodge?

Faulty Wiper Hi/Low Relay
Wiper Hi/Low Relay harness is open or shorted
Wiper Hi/Low Relay circuit poor electrical connection
Faulty Totally Integrated Power Module (TIPM)

How to Fix the DTC B2319 Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B2319 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B2319 Dodge code?

Need more information on how to fix the B2319 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B2319 Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B2319 Dodge Code

1. What does the OBDII code B2319 mean on a Dodge vehicle?

The B2319 code indicates an open circuit in the Wiper Hi/Low Control Circuit, meaning the system is unable to properly control the high and low speeds of the windshield wipers.

2. What are the common symptoms of the B2319 code?

Symptoms include windshield wipers not working at all, functioning only at one speed, or being stuck in high or low speed without proper control.

3. What causes the B2319 code to appear?

Common causes include damaged wiring or connectors in the wiper control circuit, a faulty wiper motor, a defective wiper switch, or blown fuses.

4. Can I drive my car with the B2319 code active?

While the vehicle may still be drivable, impaired wiper functionality can hinder visibility during rain or snow, making it unsafe to drive in such conditions.

5. How do I diagnose the B2319 code?

Diagnosis involves inspecting the wiring and connectors in the wiper circuit, testing the wiper motor and switch for proper function, and checking for blown fuses or relays.

6. How can the B2319 code be fixed?

Repairs may include replacing damaged wiring or connectors, repairing or replacing the wiper motor, replacing a faulty wiper switch, or replacing blown fuses or relays.

7. How much does it cost to fix the B2319 code?

Repair costs can vary widely depending on the issue, ranging from $50-$150 for minor wiring repairs to $200-$400 for wiper motor or switch replacement.

8. Can a faulty wiper motor trigger the B2319 code?

Yes, a defective wiper motor can disrupt the high/low control circuit and trigger the B2319 code.

9. Will clearing the B2319 code solve the problem?

Clearing the code without addressing the underlying issue will not fix the problem, and the code is likely to return.

10. Can I diagnose the B2319 code without professional tools?

Basic inspections like checking fuses, relays, and visible wiring can be done without special tools, but a multimeter or scan tool is needed for a thorough diagnosis.