AutoCodes – Jeep – B2317 Jeep

B2317 Jeep Code - Wiper Hi/Low Control Circuit Low

Quick Answer

The Totally Integrated Power Module (TIPM) monitors the Wiper On/Off Control Circuit. Common causes include Faulty Wiper Hi/Low Relay, Wiper Hi/Low Relay harness is open or shorted, Wiper Hi/Low Relay circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B2317 Jeep indicates Wiper Hi/Low Control Circuit Low.
Common causes
Common causes include Faulty Wiper Hi/Low Relay, Wiper Hi/Low Relay harness is open or shorted, Wiper Hi/Low Relay circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 1,931
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Nov 07, 2019
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code B2317 Jeep Description

The Totally Integrated Power Module (TIPM) monitors the Wiper On/Off Control Circuit. The Diagnostic Trouble Code (DTC) sets when the TIPM detects a short/low condition.
OBDII Code B2317 Jeep - Wiper Hi/Low Control Circuit Low - AutoCodes.com
B2317 Jeep Code - Wiper Hi/Low Control Circuit Low

What are the Possible Causes of the DTC B2317 Jeep?

  • Faulty Wiper Hi/Low Relay
  • Wiper Hi/Low Relay harness is open or shorted
  • Wiper Hi/Low Relay circuit poor electrical connection
  • Faulty Totally Integrated Power Module (TIPM)

How to Fix the DTC B2317 Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B2317 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B2317 Jeep code?

Need more information on how to fix the B2317 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B2317 Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B2317 Jeep Code

1. What does OBDII code B2317 mean for a Jeep?

B2317 indicates an issue with the Wiper Hi/Low Control Circuit, specifically that the circuit is reading a low voltage or has a fault.

2. What are the common symptoms of code B2317 in a Jeep?

Symptoms may include the windshield wipers not functioning properly, being stuck on one speed, or failing to operate altogether.

3. What causes the B2317 code to appear on a Jeep?

Common causes include a faulty wiper motor, damaged wiring or connectors in the wiper circuit, or a malfunctioning wiper switch.

4. Can a blown fuse cause the B2317 code in a Jeep?

Yes, a blown fuse related to the wiper circuit could cause the code by interrupting the electrical flow.

5. How do I diagnose the B2317 code on my Jeep?

Start by inspecting the wiper motor, wiring, connectors, and fuses. Use a multimeter to check for continuity and proper voltage in the circuit.

6. Is the B2317 code safe to drive with?

While it may not affect drivability, it can impair visibility during rain or snow, making it unsafe to drive in adverse weather conditions.

7. How do I fix the B2317 code on a Jeep?

Repairs may include replacing the wiper motor, repairing or replacing damaged wiring, or replacing the wiper switch or related fuse.

8. Can a faulty Body Control Module (BCM) trigger the B2317 code?

Yes, although less common, a malfunctioning BCM can misinterpret signals and trigger this code.

9. How much does it cost to repair code B2317 on a Jeep?

The cost varies depending on the issue, but replacing a wiper motor can range from $200 to $400, while simpler fixes like wiring repairs may cost less.

10. Will clearing the code with a scan tool fix the B2317 issue?

Clearing the code may temporarily remove it, but the underlying issue must be addressed to prevent the code from returning.

Discuss the causes and fixes for B2317 Jeep OBDII Code

Code B2317 Jeep comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play