AutoCodesChrysler – B2317 Chrysler

B2317 Chrysler Code - Wiper Hi/Low Control Circuit Low

Quick Answer

The Totally Integrated Power Module (TIPM) monitors the Wiper On/Off Control Circuit. Common causes include Faulty Wiper Hi/Low Relay, Wiper Hi/Low Relay harness is open or shorted, Wiper Hi/Low Relay circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B2317 Chrysler indicates Wiper Hi/Low Control Circuit Low.
Common causes
Common causes include Faulty Wiper Hi/Low Relay, Wiper Hi/Low Relay harness is open or shorted, Wiper Hi/Low Relay circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 962
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Nov 07, 2019
💬 Need more help? Ask Coddy for instant answers — it's free!

Code B2317 Chrysler Description

The Totally Integrated Power Module (TIPM) monitors the Wiper On/Off Control Circuit. The Diagnostic Trouble Code (DTC) sets when the TIPM detects a short/low condition.
OBDII Code B2317 Chrysler - Wiper Hi/Low Control Circuit Low - AutoCodes.com
B2317 Chrysler Code - Wiper Hi/Low Control Circuit Low

What are the Possible Causes of the DTC B2317 Chrysler?

  • Faulty Wiper Hi/Low Relay
  • Wiper Hi/Low Relay harness is open or shorted
  • Wiper Hi/Low Relay circuit poor electrical connection
  • Faulty Totally Integrated Power Module (TIPM)

How to Fix the DTC B2317 Chrysler?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B2317 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B2317 Chrysler code?

Need more information on how to fix the B2317 Chrysler code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B2317 Chrysler code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B2317 Chrysler Code

1. What does the OBDII code B2317 mean on a Chrysler vehicle?

The B2317 code indicates a problem with the Wiper Hi/Low Control Circuit, specifically that the circuit is reading a low voltage condition.

2. What are the common symptoms of code B2317 in a Chrysler?

Symptoms include windshield wipers that don’t operate in the high or low-speed settings, erratic wiper movement, or wipers being stuck in one position.

3. What causes the B2317 code to appear?

Common causes include a faulty wiper motor, damaged wiring or connectors in the wiper control circuit, or a malfunctioning wiper switch.

4. Can a blown fuse trigger the B2317 code?

Yes, a blown fuse in the wiper circuit can cause low voltage and trigger this code.

5. How is the B2317 code diagnosed?

A technician will inspect the wiper motor, wiring, and connectors for damage, test the wiper control switch, and check for proper voltage and continuity in the circuit.

6. Can I still drive my Chrysler with a B2317 code?

While you can drive with this code, limited or non-functional wipers can be dangerous in poor weather, so it’s important to address the issue promptly.

7. How do you fix a B2317 code on a Chrysler?

Repairs may involve replacing the wiper motor, repairing damaged wiring, cleaning or reconnecting corroded connectors, or replacing a faulty wiper switch.

8. How much does it cost to fix the B2317 code?

The repair cost varies but typically ranges between $150-$400, depending on whether the issue is with the motor, wiring, or switch.

9. Can I reset the B2317 code without fixing the issue?

Clearing the code without addressing the root cause may temporarily remove the error, but the code will likely reappear if the problem persists.

10. Is the B2317 code specific to Chrysler vehicles?

While the code can appear on other brands, its definition and causes may vary. For Chrysler vehicles, it specifically refers to the Wiper Hi/Low Control Circuit Low issue.

Discuss the causes and fixes for B2317 Chrysler OBDII Code

Code B2317 Chrysler comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play