AutoCodesRAM – B2310 RAM

B2310 RAM Code - Rear Washer Switch Input Circuit Low

Quick Answer

The Cluster monitors the Rear Washer Switch. Common causes include Faulty Right Multifunction Switch, Right Multifunction Switch harness is open or shorted, Right Multifunction Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B2310 RAM indicates Rear Washer Switch Input Circuit Low.
Common causes
Common causes include Faulty Right Multifunction Switch, Right Multifunction Switch harness is open or shorted, Right Multifunction Switch circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 759
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Nov 07, 2019
💬 Need more help? Ask Coddy for instant answers — it's free!

Code B2310 RAM Description

The Cluster monitors the Rear Washer Switch. The Diagnostic Trouble Code (DTC) is set when the Cluster detects the Rear Washer Switch is shorted low.
OBDII Code B2310 RAM - Rear Washer Switch Input Circuit Low - AutoCodes.com
B2310 RAM Code - Rear Washer Switch Input Circuit Low

What are the Possible Causes of the DTC B2310 RAM?

  • Faulty Right Multifunction Switch
  • Right Multifunction Switch harness is open or shorted
  • Right Multifunction Switch circuit poor electrical connection

How to Fix the DTC B2310 RAM?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B2310 RAM code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B2310 RAM code?

Need more information on how to fix the B2310 RAM code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B2310 RAM code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B2310 RAM Code

What does the OBDII code B2310 indicate?

B2310 indicates a low input circuit condition for the rear washer switch in the RAM vehicle, meaning the vehicle's computer has detected an issue with the switch's operation.

What are common symptoms of the B2310 code?

Common symptoms include the rear washer not functioning, the rear wiper not activating, or warning lights related to the washer system appearing on the dashboard.

What could cause the B2310 code to trigger?

Causes may include a faulty rear washer switch, damaged wiring or connectors in the circuit, or a malfunctioning Body Control Module (BCM).

Can I drive my vehicle with the B2310 code?

While it may be safe to drive, you will likely experience issues with the rear washer system, and it’s advisable to address the code sooner to prevent further electrical issues.

How can I diagnose the B2310 code?

Start by using an OBDII scanner to confirm the code, then visually inspect the rear washer switch, wiring, and connectors for damage or corrosion. Testing the switch with a multimeter can also help determine if it’s functioning correctly.

What are some repair tips for fixing the B2310 code?

Repair tips include replacing the rear washer switch if it’s faulty, repairing any damaged wiring, ensuring all connections are secure, and, if necessary, reprogramming or replacing the BCM.

Is the B2310 code related to other OBDII codes?

Yes, it may be related to other codes in the washer or wiper system, especially those dealing with the electrical circuits of the body control module.

How much does it typically cost to repair the B2310 issue?

Repair costs can vary widely depending on the cause, ranging from a simple switch replacement costing around $50 to $200, to more extensive repairs involving wiring or the BCM that could be $200 to $600 or more.

Can I clear the B2310 code myself?

Yes, you can clear the code using an OBDII scanner, but it’s important to fix the underlying issue to prevent the code from returning.

Discuss the causes and fixes for B2310 RAM OBDII Code

Code B2310 RAM comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play