AutoCodes – Chrysler – B230A Chrysler

B230A Chrysler Code - Rear Wiper Switch Input Circuit Low

Quick Answer

The Cluster monitors the Rear Wiper Switch. Common causes include Faulty Right Multifunction Switch, Right Multifunction Switch harness is open or shorted, Right Multifunction Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B230A Chrysler indicates Rear Wiper Switch Input Circuit Low.
Common causes: Common causes include Faulty Right Multifunction Switch, Right Multifunction Switch harness is open or shorted, Right Multifunction Switch circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 824

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 31, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B230A Chrysler Description

The Cluster monitors the Rear Wiper Switch. The Diagnostic Trouble Code (DTC) sets when the Cluster detects the Rear Wiper Switch is shorted low.

OBDII Code B230A Chrysler - Rear Wiper Switch Input Circuit Low - AutoCodes.com — B230A Chrysler Code - Rear Wiper Switch Input Circuit Low

What does this mean?

What are the Possible Causes of the DTC B230A Chrysler?

Faulty Right Multifunction Switch
Right Multifunction Switch harness is open or shorted
Right Multifunction Switch circuit poor electrical connection

How to Fix the DTC B230A Chrysler?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B230A Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B230A Chrysler code?

Need more information on how to fix the B230A Chrysler code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B230A Chrysler code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B230A Chrysler Code

1. What are the common symptoms of OBDII code B230A in a Chrysler related to the Rear Wiper Switch Input Circuit Low?

The common symptoms include the rear wiper not functioning properly or not working at all.

2. What are the possible causes of the OBDII code B230A in a Chrysler indicating a Rear Wiper Switch Input Circuit Low?

Possible causes include a faulty rear wiper switch, damaged wiring or connectors in the circuit, or a malfunctioning rear wiper motor.

3. How can I diagnose the OBDII code B230A in a Chrysler for the Rear Wiper Switch Input Circuit Low?

You can use a multimeter to test the rear wiper switch, inspect the wiring for any visible damage, and check the connectors for a secure connection.

4. Can a simple fuse issue trigger the OBDII code B230A in a Chrysler for the Rear Wiper Switch Input Circuit Low?

Yes, a blown fuse related to the rear wiper system can also trigger this code, so it's recommended to inspect and replace any faulty fuses.

5. What are some repair tips for fixing the OBDII code B230A in a Chrysler due to a Rear Wiper Switch Input Circuit Low?

Ensure the rear wiper switch is functioning correctly, repair any damaged wiring or connectors, and replace the rear wiper motor if necessary.

6. Is it safe to continue driving my Chrysler with the OBDII code B230A indicating a Rear Wiper Switch Input Circuit Low?

It is not recommended to continue driving the vehicle with this code unresolved, as it may lead to further issues with the rear wiper system.

7. Can I reset the OBDII code B230A in a Chrysler for the Rear Wiper Switch Input Circuit Low by disconnecting the battery?

While disconnecting the battery may clear the code temporarily, it is important to diagnose and repair the root cause to prevent the code from reoccurring.

8. Do I need specialized tools to fix the OBDII code B230A in a Chrysler related to the Rear Wiper Switch Input Circuit Low?

Basic tools such as a multimeter, wiring diagram, and basic hand tools are typically sufficient for diagnosing and repairing this issue.

9. How long does it take to repair the OBDII code B230A in a Chrysler indicating a Rear Wiper Switch Input Circuit Low?

The repair time can vary depending on the exact cause of the issue, but it can typically be resolved within a few hours to a day.

10. Should I seek professional help to address the OBDII code B230A in a Chrysler for the Rear Wiper Switch Input Circuit Low?

If you are unsure about diagnosing or repairing the issue yourself, it is advisable to seek assistance from a qualified mechanic or technician to properly address the problem.