OBDII Code List

B2283 SCION - Vehicle Speed Sensor Malfunction

Repair Importance Level: 3/3
Repair Difficulty Level: 3/3   
Comments  |  Add Comment

B2283 SCION Possible Causes

  • Faulty Combination Meter
  • Faulty Vehicle Speed Sensor
  • Faulty Skid Control ECU
  • Faulty Main Body ECU
  • Main Body ECU harness is open or shorted
  • Main Body ECU circuit poor electrical connection

First diagnose B2283 SCION code

    Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

Cost of diagnosing the B2283 SCION code

    Labor: 1.0

    The cost of diagnosing the B2283 SCION code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.

B2283 SCION Possible Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)

B2283 Scion Description

The Skid Control ECU converts these signals into 4-pulse signals and sends them to the Combination Meter. After this signal is converted into a more precise rectangular waveform by the waveform shaping circuit inside the combination meter, it is then transmitted to the Main Body ECU. The Main Body ECU determines the vehicle speed based on the frequency of these pulse signals.
OBDII Code B2283 Scion - Vehicle Speed Sensor Malfunction -

B2283 SCION More Information

Need more information on how to fix the B2283 SCION code?
Get Access to Factory Service Manuals

Need more help?

Get the B2283 Scion code diagnosed by a professional: Find a repair shop in your area

Related Information

B2283 SCION Comments

Help us improve Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the B2283 Scion code? Have you replaced any parts?
Any information is appreciated. Thanks
Top ⇧