B2266 Mercury Code - Left Side Blend Door Circuit Failure
Quick Answer
Under normal operation, to rotate the temperature blend door actuator, the HVAC module supplies voltage and ground to the temperature blend door actuators through the door actuator motor circuits. Common causes include Faulty Left Side Blend Door Actuator, Left Side Blend Door Actuator harness is open or shorted, Left Side Blend Door Actuator circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2266 Mercury indicates Left Side Blend Door Circuit Failure.
- Common causes
- Common causes include Faulty Left Side Blend Door Actuator, Left Side Blend Door Actuator harness is open or shorted, Left Side Blend Door Actuator circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B2266 Mercury Description
The temperature blend door actuator feedback resistors are supplied a ground from the HVAC module by the temperature blend door actuator return circuits and a 5-volt reference voltage on the temperature blend door actuator reference circuits. The HVAC module reads the voltage on the temperature blend door actuator feedback circuits to determine the temperature blend door actuator position by the position of the actuator feedback resistor wiper arm.
During an actuator calibration cycle, the HVAC module drives the temperature blend door until the door reaches both internal stops in the HVAC case. If the temperature blend door is temporarily obstructed or binding during a calibration cycle, the HVAC module may interpret this as the actual end of travel for the door. When this condition occurs and the HVAC module commands the actuator to its end of travel, the airflow may not be from the expected outlets.
The Diagnostic Trouble Code (DTC) sets when the module senses no change in actuator feedback voltage when the actuator motor has been energized.
What are the Possible Causes of the DTC B2266 Mercury?
- Faulty Left Side Blend Door Actuator
- Left Side Blend Door Actuator harness is open or shorted
- Left Side Blend Door Actuator circuit poor electrical connection
- Faulty Heating, Ventilation, and Air-Conditioning (HVAC) Module
- Faulty Electronic Manual Temperature Control (EMTC)
How to Fix the DTC B2266 Mercury?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B2266 Mercury code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B2266 Mercury code?
Need more information on how to fix the B2266 Mercury code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2266 Mercury code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B2266 Mercury Code
1. What does OBDII code B2266 mean on a Mercury vehicle?
Code B2266 indicates a Left Side Blend Door Circuit Failure, meaning the circuit controlling the blend door on the left side is malfunctioning.
2. What are the symptoms of code B2266 in a Mercury?
Common symptoms include inconsistent or no temperature control on the left side of the cabin, unusual noises from the HVAC system, or failure to switch between hot and cold air.
3. What causes the B2266 code to appear?
The code can be triggered by a faulty blend door actuator, damaged wiring or connectors in the blend door circuit, or a malfunctioning HVAC control module.
4. How do I diagnose code B2266 on a Mercury?
Start by scanning for additional codes, then inspect the blend door actuator, wiring, and connectors for damage. Test the actuator functionality and check for voltage at the circuit.
5. Can I still drive my Mercury with code B2266 active?
Yes, but the HVAC system may not function correctly, potentially leaving you without proper cabin heating or cooling on the left side.
6. How do I fix the B2266 code on a Mercury?
Repairs may involve replacing the blend door actuator, repairing damaged wiring, or, in rare cases, replacing the HVAC control module.
7. How much does it cost to repair the B2266 code on a Mercury?
The cost can range from $150 to $500, depending on whether the issue is with the actuator, wiring, or control module.
8. Can I fix the B2266 code myself?
If you are comfortable working with electrical components and HVAC systems, you can replace a faulty actuator or repair wiring yourself. However, professional help is recommended for more complex issues.
9. Does clearing the B2266 code solve the issue permanently?
No, clearing the code will only temporarily remove it. The underlying issue must be fixed to prevent the code from returning.
10. How can I prevent code B2266 from occurring again?
Regularly inspect and maintain the HVAC system, ensure wiring and connectors are secure, and avoid overloading the actuator by switching temperature settings excessively.
Discuss the causes and fixes for B2266 Mercury OBDII Code
Code B2266 Mercury comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
