AutoCodesGMC – B2263 GMC

B2263 GMC Code - Right Horizontal Position Sensor Circuit

Quick Answer

The Driver Door Module (DDM) and the Passenger Door Module (PDM) receive mirror position signals from the mirror horizontal and vertical position sensors. Common causes include Faulty Right Mirror Assembly, Right Mirror Assembly harness is open or shorted, Right Mirror Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B2263 GMC indicates Right Horizontal Position Sensor Circuit.
Common causes
Common causes include Faulty Right Mirror Assembly, Right Mirror Assembly harness is open or shorted, Right Mirror Assembly circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 513
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Oct 28, 2019
💬 Need more help? Ask Coddy for instant answers — it's free!

Code B2263 GMC Description

The Driver Door Module (DDM) and the Passenger Door Module (PDM) receive mirror position signals from the mirror horizontal and vertical position sensors. These signals are used by the door modules for memory recall functions of the driver and passenger mirrors. The door modules command the mirror memory settings based upon the voltage level received back from the position sensors. Each door module provides a 5 volt supply, a signal and a ground circuit for each of the position sensors. The horizontal and vertical position sensors are variable resistors that the door modules monitor voltage levels across. When a memory setting is recalled, the door modules command the mirror motors in the appropriate directions until the stored position sensor voltage levels are achieved. The DDM and PDM monitor the signal circuits to determine if the voltage level is out of range. If the DDM or PDM detects a voltage level out of range for greater than 2 seconds, a DTC is set.
OBDII Code B2263 GMC - Right Horizontal Position Sensor Circuit - AutoCodes.com
B2263 GMC Code - Right Horizontal Position Sensor Circuit

What are the Possible Causes of the DTC B2263 GMC?

  • Faulty Right Mirror Assembly
  • Right Mirror Assembly harness is open or shorted
  • Right Mirror Assembly circuit poor electrical connection
  • Faulty Passenger Door Module (PDM)

How to Fix the DTC B2263 GMC?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B2263 GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B2263 GMC code?

Need more information on how to fix the B2263 GMC code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B2263 GMC code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B2263 GMC Code

1. What does the OBDII code B2263 mean on a GMC vehicle?

The B2263 code indicates a problem with the right horizontal position sensor circuit, typically related to the sensor that monitors the position of a seat or similar component.

2. What are the common symptoms of the B2263 code on a GMC?

Symptoms may include malfunctioning seat adjustments, a warning light on the dashboard, or a failure of memory seat functions.

3. What causes the B2263 code to appear?

Common causes include a faulty right horizontal position sensor, damaged wiring or connectors, or an issue with the related control module.

4. Can I still drive my GMC with the B2263 code active?

Yes, you can usually drive with this code active, but seat adjustment features may not work properly, which could affect comfort or safety.

5. How do I diagnose the B2263 code on my GMC?

Diagnosis involves checking the right horizontal position sensor, inspecting the wiring and connectors for damage, and using a scan tool to monitor sensor signals.

6. What tools are needed to fix the B2263 code?

You'll need a multimeter to test wiring, a scan tool to read and clear codes, and potentially replacement parts like the position sensor or connectors.

7. How do I fix the B2263 code on my GMC?

Repairs may include replacing the faulty sensor, repairing damaged wiring or connectors, or reprogramming the control module if necessary.

8. How much does it cost to repair the B2263 code on a GMC?

Repair costs vary depending on the issue, but replacing the sensor typically costs $100–$300, including parts and labor.

9. Can a faulty control module cause the B2263 code?

Yes, though it is less common, a malfunctioning control module can lead to this code by failing to properly process the sensor’s signals.

10. Will clearing the B2263 code solve the issue permanently?

No, clearing the code will only temporarily remove it. The underlying issue must be repaired to prevent the code from returning.

Discuss the causes and fixes for B2263 GMC OBDII Code

Code B2263 GMC comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play