B2255 RAM Code - Occupant Restrain Controller Roll Over Feature Disable
Quick Answer
When powered, the Occupant Restraint Controller (ORC) performs an internal self test. Common causes include Faulty Occupant Restraint Controller (ORC). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2255 RAM indicates Occupant Restrain Controller Roll Over Feature Disable.
- Common causes
- Common causes include Faulty Occupant Restraint Controller (ORC).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B2255 RAM Description
This Diagnostic Trouble Code (DTC) sets when the ORC detects the roll over feature has been disabled contrary to the correct vehicle configuration or has been disabled with the scan tool. This DTC can only be Active.
What are the Possible Causes of the DTC B2255 RAM?
- Faulty Occupant Restraint Controller (ORC)
How to Fix the DTC B2255 RAM?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B2255 RAM code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B2255 RAM code?
Need more information on how to fix the B2255 RAM code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2255 RAM code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B2255 RAM Code
1. What does OBDII code B2255 in a RAM vehicle mean?
Code B2255 indicates an issue with the Occupant Restraint Controller (ORC) related to the Roll Over Feature being disabled or malfunctioning.
2. What are the common symptoms of the B2255 code?
Symptoms may include the airbag warning light being illuminated, the rollover protection feature not functioning, and potential failure of related safety systems during a rollover event.
3. What causes the B2255 code to appear in a RAM vehicle?
This code can be triggered by a faulty Occupant Restraint Controller, software issues, damaged wiring or connectors, or a disabled rollover feature due to a configuration error.
4. Can I drive my vehicle with the B2255 code active?
While the vehicle may still be driveable, the airbag and rollover safety features may be compromised, posing a safety risk in the event of an accident.
5. How is the B2255 code diagnosed?
A technician will use an OBDII scanner to read the code, inspect the Occupant Restraint Controller and its wiring, and check for any software or configuration issues.
6. What are some common fixes for the B2255 code?
Repairs could include reprogramming the ORC, repairing or replacing damaged wiring or connectors, or replacing the Occupant Restraint Controller if it is faulty.
7. Can a software update resolve the B2255 code?
Yes, in some cases, a software update or reprogramming of the Occupant Restraint Controller might resolve the issue.
8. How much does it cost to repair a B2255 code?
The cost varies depending on the exact cause, ranging from a simple reset or software update (around $100) to replacing the ORC module, which could cost $500 or more.
9. Is the B2255 code related to the airbag system?
Yes, the B2255 code directly affects the airbag system, specifically the rollover protection feature, which is part of the overall safety system.
10. Can I reset the B2255 code without fixing the issue?
While the code can be cleared with an OBDII scanner, it will likely return if the underlying issue is not resolved. Ignoring it can compromise vehicle safety.
Discuss the causes and fixes for B2255 RAM OBDII Code
Code B2255 RAM comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.