AutoCodes – GMC – B2237 GMC

B2237 GMC Code - Right Door Lock Switch Fault

Quick Answer

The driver or passenger door switch signal circuits provide inputs to the Driver Door Module (DDM) or Passenger Door Module (PDM) when a door lock switch is activated to the LOCK or UNLOCK position. Common causes include Faulty Right Door Lock Switch, Right Door Lock Switch harness is open or shorted, Right Door Lock Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B2237 GMC indicates Right Door Lock Switch Fault.
Common causes
Common causes include Faulty Right Door Lock Switch, Right Door Lock Switch harness is open or shorted, Right Door Lock Switch circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 535
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Oct 10, 2019
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code B2237 GMC Description

The driver or passenger door switch signal circuits provide inputs to the Driver Door Module (DDM) or Passenger Door Module (PDM) when a door lock switch is activated to the LOCK or UNLOCK position. These inputs allow the door module to detect a door LOCK or UNLOCK request. The door modules provide power and ground to the door lock switches. When a door lock switch is activated to the LOCK or UNLOCK position, ground is supplied through the door lock switch to the signal circuit, which is pulled low. When the door module detects low voltage on the signal circuit, it will command the door latches to LOCK or UNLOCK. If the driver door switch is activated, the DDM will LOCK or UNLOCK the driver door latch and also send a message on the serial data line to the PDM to LOCK or UNLOCK the passenger door latch. If the passenger door switch is activated, the PDM will LOCK or UNLOCK the passenger door latch and also send a message on the serial data line to the DDM to LOCK or UNLOCK the driver door latch. The door modules monitor the signal circuits to determine how long the ground has been applied. If the door module detects that a ground is applied for greater than 20 seconds, a Diagnostic Trouble Code (DTC) is set.
OBDII Code B2237 GMC - Right Door Lock Switch Fault - AutoCodes.com
B2237 GMC Code - Right Door Lock Switch Fault

What are the Possible Causes of the DTC B2237 GMC?

  • Faulty Right Door Lock Switch
  • Right Door Lock Switch harness is open or shorted
  • Right Door Lock Switch circuit poor electrical connection
  • Faulty Passenger Door Module (PDM)

How to Fix the DTC B2237 GMC?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B2237 GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B2237 GMC code?

Need more information on how to fix the B2237 GMC code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B2237 GMC code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B2237 GMC Code

1. What does the OBDII code B2237 mean for a GMC vehicle?

The B2237 code indicates a fault with the right door lock switch, often due to an electrical issue or a malfunctioning switch.

2. What are the common symptoms of the B2237 code?

Symptoms include the right door lock not responding to commands, intermittent operation, or failure of the lock to engage or disengage.

3. What causes the B2237 code to appear?

Common causes include a faulty door lock switch, wiring issues such as shorts or open circuits, or a malfunctioning door control module.

4. Can a loose connection trigger the B2237 code?

Yes, a loose or corroded connection in the door lock switch circuit can cause this fault code.

5. How is the B2237 code diagnosed?

A technician will use a scan tool to confirm the code, inspect the wiring and connectors, and test the door lock switch and module for proper function.

6. Can I still drive my vehicle with the B2237 code?

Yes, the vehicle is typically drivable, but the right door lock may not function properly, which could affect security.

7. Do I need to replace the door lock switch to fix the B2237 code?

Not necessarily. The issue could also be caused by wiring problems or a faulty module, so proper diagnosis is essential.

8. How much does it cost to repair the B2237 code?

Repair costs vary but may range from $50 to $200, depending on whether the issue is with the switch, wiring, or control module.

9. Can I clear the B2237 code without fixing the issue?

Clearing the code without addressing the root cause will likely result in the code reappearing after a short time.

10. How can I prevent the B2237 code from occurring?

Regularly inspect and maintain the door lock system, including checking for corrosion, loose connections, and ensuring the switch operates smoothly.

Discuss the causes and fixes for B2237 GMC OBDII Code

Code B2237 GMC comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play