AutoCodes – Toyota – B2227 2015 Toyota RAV4

B2227 2015 Toyota RAV4 Code - Power Back Door Unit Pulse Sensor Right Circuit

Quick Answer

The Power Back Door system enables the back door to be opened and closed automatically by a motor in accordance with signals from the back door control switch or the power back door button on an electrical key transmitter sub-assembly or door control transmitter. Common causes include Faulty Power Back Door (PBD) Unit Assembly Right (RH), Power Back Door Unit Assembly Right harness is open or shorted, Power Back Door Unit Assembly Right circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B2227 2015 Toyota RAV4 indicates Power Back Door Unit Pulse Sensor Right Circuit.
Common causes: Common causes include Faulty Power Back Door (PBD) Unit Assembly Right (RH), Power Back Door Unit Assembly Right harness is open or shorted, Power Back Door Unit Assembly Right circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 467

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Dec 09, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B2227 2015 Toyota RAV4 Description

The Power Back Door system enables the back door to be opened and closed automatically by a motor in accordance with signals from the back door control switch or the power back door button on an electrical key transmitter sub-assembly or door control transmitter. In addition, a door control switch assembly has been provided on the back door for convenience.
This Diagnostic Trouble Code (DTC) is output when the Multiplex Network Door ECU detects a Power Back Door (PBD) Unit Assembly set Right (RH) pulse malfunction.

OBDII Code B2227 2015 Toyota RAV4 - Power Back Door Unit Pulse Sensor Right Circuit - AutoCodes.com — B2227 2015 Toyota RAV4 Code - Power Back Door Unit Pulse Sensor Right Circuit

What does this mean?

What are the Possible Causes of the DTC B2227 2015 Toyota RAV4?

Faulty Power Back Door (PBD) Unit Assembly Right (RH)
Power Back Door Unit Assembly Right harness is open or shorted
Power Back Door Unit Assembly Right circuit poor electrical connection
Faulty Multiplex Network Door ECU

How to Fix the DTC B2227 2015 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B2227 2015 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B2227 2015 Toyota RAV4 code?

Need more information on how to fix the B2227 2015 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B2227 2015 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B2227 2015 Toyota RAV4 Code

1. What does the OBDII code B2227 mean for a 2015 Toyota RAV4?

The B2227 code indicates an issue with the Power Back Door Unit Pulse Sensor Right Circuit, which monitors the movement and position of the right side of the power back door.

2. What are the common symptoms of the B2227 code?

Symptoms include the power back door not opening or closing properly, unusual noises during operation, or the power back door becoming unresponsive.

3. What causes the B2227 code to appear?

Common causes include a faulty pulse sensor, damaged wiring or connectors in the circuit, or a malfunctioning power back door control unit.

4. Can I still use the power back door if the B2227 code is active?

The power back door may operate inconsistently or stop functioning altogether, but manual operation might still be possible.

5. How do I diagnose the B2227 code?

Diagnosis involves inspecting the pulse sensor, checking for damaged or disconnected wiring, and testing the functionality of the power back door control unit.

6. Can a faulty pulse sensor cause the power back door to stop working?

Yes, a faulty pulse sensor can prevent the power back door system from accurately detecting its position, leading to operational failure.

7. How do I fix the B2227 code?

Repairs typically involve replacing the faulty pulse sensor, repairing damaged wiring, or, in some cases, replacing the power back door control unit.

8. Is the B2227 code specific to the right side of the power back door?

Yes, the code specifically refers to the pulse sensor and circuit on the right side of the power back door.

9. How much does it cost to fix the B2227 code on a 2015 Toyota RAV4?

Repair costs vary depending on whether the sensor, wiring, or control unit needs replacement, but it typically ranges from $150 to $500, including parts and labor.

10. Can I prevent the B2227 code from recurring?

Regular maintenance of the power back door system, checking for loose or damaged wiring, and ensuring smooth operation can help prevent the code from recurring.