B220C Dodge Code - Occupant Restraint Controller Accelerometer 1 Internal
Quick Answer
When powered, the Occupant Restraint Controller (ORC) performs an internal self test. Common causes include Faulty Occupant Restraint Controller (ORC), Occupant Restraint Controller (ORC) harness is open or shorted, Occupant Restraint Controller (ORC) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B220C Dodge indicates Occupant Restraint Controller Accelerometer 1 Internal.
- Common causes
- Common causes include Faulty Occupant Restraint Controller (ORC), Occupant Restraint Controller (ORC) harness is open or shorted, Occupant Restraint Controller (ORC) circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B220C Dodge Description
What are the Possible Causes of the DTC B220C Dodge?
- Faulty Occupant Restraint Controller (ORC)
- Occupant Restraint Controller (ORC) harness is open or shorted
- Occupant Restraint Controller (ORC) circuit poor electrical connection
How to Fix the DTC B220C Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B220C Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B220C Dodge code?
Need more information on how to fix the B220C Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B220C Dodge code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B220C Dodge Code
What does the OBDII code B220C mean for a Dodge vehicle?
The B220C code indicates a problem with the occupant restraint controller's accelerometer, specifically an internal fault.
What symptoms might indicate that there is a B220C code present?
Common symptoms include the airbag warning light illuminated on the dashboard and potential issues with airbag deployment during a crash.
What could cause the B220C code to trigger?
Causes may include a faulty accelerometer, damaged wiring or connectors, or a malfunctioning occupant restraint controller.
Can I drive my vehicle with a B220C code?
While it may be safe to drive, it is not recommended as the airbag system may not function properly in the event of an accident.
How can I diagnose a B220C code?
You can use an OBDII scanner to read the code and check the associated wiring and connectors for damage, as well as test the accelerometer and occupant restraint controller.
What are common repair solutions for the B220C code?
Repairs may involve replacing the faulty accelerometer, repairing damaged wiring, or replacing the occupant restraint controller unit.
Is it necessary to reset the code after repairs?
Yes, after repairs are made, the code should be cleared using an OBDII scanner to reset the system and check if the issue is resolved.
Can a faulty battery cause a B220C code?
Yes, low voltage or battery issues can sometimes trigger various codes, including B220C, due to insufficient power for the airbag system.
How much might it cost to fix a B220C code?
Repair costs can vary widely based on the underlying issue, ranging from a simple wiring repair to the replacement of the occupant restraint controller, potentially costing several hundred dollars.
Discuss the causes and fixes for B220C Dodge OBDII Code
Code B220C Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
