AutoCodes – Chrysler – B220A Chrysler

B220A Chrysler Code - Occupant Restraint Controller Internal 1

Quick Answer

When powered, the Occupant Restraint Controller (ORC) performs an internal self test. Common causes include Faulty Occupant Restraint Controller (ORC), Occupant Restraint Controller (ORC) harness is open or shorted, Occupant Restraint Controller (ORC) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B220A Chrysler indicates Occupant Restraint Controller Internal 1.
Common causes: Common causes include Faulty Occupant Restraint Controller (ORC), Occupant Restraint Controller (ORC) harness is open or shorted, Occupant Restraint Controller (ORC) circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,525

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 10, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B220A Chrysler Description

When powered, the Occupant Restraint Controller (ORC) performs an internal self test. The repair of this fault condition does not involve any external circuitry and centers on verifying the integrity of the module's internal circuitry and software validity.
When Monitored the ORC checks the status and validity of the internal operating hardware and software at power up during the initialization process, and continuing through the ignition cycle.
Set Condition this Diagnostic Trouble Code (DTC) sets when a fault is detected internal to ORC hardware and/or software. Once set, this DTC is latched for the entire power cycle. If the same failure is detected in two consecutive power cycles, this DTC is latched active indefinitely.

OBDII Code B220A Chrysler - Occupant Restraint Controller Internal 1 - AutoCodes.com — B220A Chrysler Code - Occupant Restraint Controller Internal 1

What does this mean?

What are the Possible Causes of the DTC B220A Chrysler?

Faulty Occupant Restraint Controller (ORC)
Occupant Restraint Controller (ORC) harness is open or shorted
Occupant Restraint Controller (ORC) circuit poor electrical connection

How to Fix the DTC B220A Chrysler?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B220A Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B220A Chrysler code?

Need more information on how to fix the B220A Chrysler code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B220A Chrysler code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B220A Chrysler Code

1. What are common symptoms of OBDII code B220A for the Occupant Restraint Controller Internal 1 in a Chrysler vehicle?

The common symptoms may include the airbag warning light being illuminated on the dashboard and potential issues with the vehicle's airbag system.

2. What are the possible causes of OBDII code B220A in a Chrysler vehicle?

Possible causes of this code include a faulty Occupant Restraint Controller (ORC), wiring issues, or a malfunctioning airbag module.

3. How can I diagnose OBDII code B220A related to the Occupant Restraint Controller Internal 1 in my Chrysler vehicle?

Diagnosis typically involves using an OBDII scanner to retrieve the specific fault code, inspecting the ORC and related components for damage, and checking the wiring for any faults.

4. Can I still drive my Chrysler vehicle with OBDII code B220A present?

It is not recommended to drive the vehicle with this code present, as it indicates a potential issue with the airbag system that could affect its functionality in the event of an accident.

5. How can I repair OBDII code B220A for the Occupant Restraint Controller Internal 1 in my Chrysler?

Repairing this code may involve replacing the faulty ORC, repairing damaged wiring, or resetting the airbag system after addressing the underlying issue.

6. Is it safe to reset the OBDII code B220A for the Occupant Restraint Controller Internal 1 in my Chrysler without fixing the root cause?

It is not recommended to reset the code without addressing the underlying issue, as it could pose a safety risk in the event of an accident if the airbag system is not functioning correctly.

7. Will OBDII code B220A for the Occupant Restraint Controller Internal 1 cause my Chrysler's airbags to deploy unexpectedly?

While this code typically indicates a fault in the airbag system, it is unlikely to cause the airbags to deploy unexpectedly. However, it is important to address the issue promptly to ensure the airbags function properly when needed.

8. Can a DIY enthusiast repair OBDII code B220A for the Occupant Restraint Controller Internal 1 in a Chrysler vehicle?

While some aspects of diagnosing and repairing this code may be feasible for a DIY enthusiast, working on the airbag system can be complex and dangerous. It is recommended to seek professional assistance for such repairs.

9. How much does it typically cost to repair OBDII code B220A related to the Occupant Restraint Controller Internal 1 in a Chrysler?

The cost of repairing this code can vary depending on the specific issue, parts needed, and labor rates. It is advisable to get a diagnosis from a qualified mechanic to determine the exact cost.

10. Will fixing OBDII code B220A for the Occupant Restraint Controller Internal 1 in my Chrysler reset the airbag warning light?

Once the root cause of the code is addressed and the issue is repaired, the airbag warning light should reset itself. If it does not, a mechanic may need to clear the code manually.