B2209 RAM Code - Occupant Restraint Controller Internal 3
Quick Answer
When powered, the Occupant Restraint Controller (ORC) performs an internal self test. Common causes include Faulty Occupant Restraint Controller (ORC), Occupant Restraint Controller (ORC) harness is open or shorted, Occupant Restraint Controller (ORC) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2209 RAM indicates Occupant Restraint Controller Internal 3.
- Common causes
- Common causes include Faulty Occupant Restraint Controller (ORC), Occupant Restraint Controller (ORC) harness is open or shorted, Occupant Restraint Controller (ORC) circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B2209 RAM Description
When Monitored the ORC checks the status and validity of the internal operating hardware and software at power up during the initialization process, and continuing through the ignition cycle.
Set Condition this Diagnostic Trouble Code (DTC) sets when a fault is detected internal to ORC hardware and/or software. Once set, this DTC is latched for the entire power cycle. If the same failure is detected in two consecutive power cycles, this DTC is latched active indefinitely.
What are the Possible Causes of the DTC B2209 RAM?
- Faulty Occupant Restraint Controller (ORC)
- Occupant Restraint Controller (ORC) harness is open or shorted
- Occupant Restraint Controller (ORC) circuit poor electrical connection
How to Fix the DTC B2209 RAM?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B2209 RAM code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B2209 RAM code?
Need more information on how to fix the B2209 RAM code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2209 RAM code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B2209 RAM Code
What does the OBDII code B2209 mean for a RAM vehicle?
The B2209 code indicates an "Occupant Restraint Controller Internal 3" issue, meaning there’s a malfunction within the vehicle’s airbag or restraint control module.
What are the common symptoms of the B2209 code in a RAM vehicle?
Symptoms include the airbag warning light staying illuminated, potential loss of airbag functionality, and trouble codes stored in the vehicle's system.
What causes the B2209 code to appear in a RAM vehicle?
The code is typically triggered by internal faults in the occupant restraint controller, wiring issues, or water damage to the module.
Can driving with the B2209 code affect vehicle safety?
Yes, this code can compromise airbag functionality, which may reduce occupant safety during a collision.
How can the B2209 code be diagnosed?
A technician will use an advanced scan tool to read the code, inspect wiring and connections, and test the occupant restraint controller for faults.
Can the B2209 code be fixed without replacing the occupant restraint controller?
In some cases, repairing damaged wiring or clearing stored codes may resolve the issue, but replacement is often necessary if the module is defective.
How much does it cost to repair the B2209 code in a RAM vehicle?
Repair costs vary but can range from $300 to $1,000, depending on whether the controller needs replacement or wiring repairs are sufficient.
Is it safe to clear the B2209 code without repairing the issue?
No, clearing the code without addressing the underlying problem could leave the airbag system non-functional.
What tools are required to fix the B2209 code?
You’ll need an advanced OBDII scanner, basic electrical tools, and potentially a replacement occupant restraint controller module.
Can a faulty battery cause the B2209 code?
Yes, a weak or failing battery can sometimes lead to electrical issues that trigger this code. Always check the battery before proceeding with repairs.
Discuss the causes and fixes for B2209 RAM OBDII Code
Code B2209 RAM comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
