AutoCodes – RAM – B2207 RAM

B2207 RAM Code - Occupant Restraint Controller Internal 1

Quick Answer

When powered, the Occupant Restraint Controller (ORC) performs an internal self test. Common causes include Faulty Occupant Restraint Controller (ORC), Occupant Restraint Controller (ORC) harness is open or shorted, Occupant Restraint Controller (ORC) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B2207 RAM indicates Occupant Restraint Controller Internal 1.
Common causes: Common causes include Faulty Occupant Restraint Controller (ORC), Occupant Restraint Controller (ORC) harness is open or shorted, Occupant Restraint Controller (ORC) circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 998

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 10, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B2207 RAM Description

When powered, the Occupant Restraint Controller (ORC) performs an internal self test. The repair of this fault condition does not involve any external circuitry and centers on verifying the integrity of the module's internal circuitry and software validity.
When Monitored the ORC checks the status and validity of the internal operating hardware and software at power up during the initialization process, and continuing through the ignition cycle.
Set Condition this Diagnostic Trouble Code (DTC) sets when a fault is detected internal to ORC hardware and/or software. Once set, this DTC is latched for the entire power cycle. If the same failure is detected in two consecutive power cycles, this DTC is latched active indefinitely.

OBDII Code B2207 RAM - Occupant Restraint Controller Internal 1 - AutoCodes.com — B2207 RAM Code - Occupant Restraint Controller Internal 1

What does this mean?

What are the Possible Causes of the DTC B2207 RAM?

Faulty Occupant Restraint Controller (ORC)
Occupant Restraint Controller (ORC) harness is open or shorted
Occupant Restraint Controller (ORC) circuit poor electrical connection

How to Fix the DTC B2207 RAM?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B2207 RAM code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B2207 RAM code?

Need more information on how to fix the B2207 RAM code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B2207 RAM code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B2207 RAM Code

1. What are common symptoms of OBDII code B2207 RAM (Occupant Restraint Controller Internal 1)?

Common symptoms include the airbag warning light illuminating on the dashboard, failure of the airbags to deploy in a collision, and potential issues with seat belt pretensioners.

2. What are possible causes of OBDII code B2207 RAM?

Potential causes of this code include a faulty occupant restraint controller, wiring issues, a blown fuse, or a malfunctioning airbag system component.

3. How can I diagnose the cause of OBDII code B2207 RAM?

Diagnosing this code typically involves using a professional OBDII scanner to read the fault codes, inspecting the wiring and connections in the airbag system, and conducting component tests as outlined in the vehicle's repair manual.

4. Can I continue driving with OBDII code B2207 RAM present?

It is not recommended to continue driving with this code present, as it indicates a potential issue with the airbag system that could compromise occupant safety in the event of a collision.

5. How can I repair OBDII code B2207 RAM?

Repairing this code may involve replacing the occupant restraint controller, repairing or replacing damaged wiring, checking and replacing fuses if necessary, and ensuring all airbag system components are functioning properly.

6. Is it safe to reset the OBDII code B2207 RAM without fixing the underlying issue?

It is not safe to simply reset the code without addressing the root cause, as doing so may lead to a recurrence of the problem and potentially compromise the functionality of the airbag system.

7. Can a DIY enthusiast fix OBDII code B2207 RAM at home?

While some simple checks like inspecting wiring connections can be done at home, diagnosing and repairing this code may require specialized tools and expertise, making it best left to professional mechanics.

8. How much does it typically cost to repair OBDII code B2207 RAM?

The cost of repairing this code can vary depending on the underlying issue, the need for replacement parts, and labor costs. It is advisable to obtain quotes from different repair shops for an accurate estimate.

9. Are there any recalls or technical service bulletins related to OBDII code B2207 RAM?

It is recommended to check with the vehicle manufacturer or authorized dealerships for any recalls or technical service bulletins related to this specific OBDII code to see if the repair may be covered under warranty.

10. How can I prevent OBDII code B2207 RAM from occurring in the future?

Regular maintenance of the airbag system, prompt attention to any warning lights or unusual behavior, and following the manufacturer's recommended service schedule can help prevent the occurrence of this code in the future.