B2205 2013 Toyota RAV4 Code - Kick Sensor Circuit
Quick Answer
The Diagnostic Trouble Code (DTC) B2205 is output when the Multiplex Network Door ECU detects that the Kick Door Control Sensor is stuck on. Common causes include Faulty Kick Door Control Sensor, Kick Door Control Sensor harness is open or shorted, Kick Door Control Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2205 2013 Toyota RAV4 indicates Kick Sensor Circuit.
- Common causes
- Common causes include Faulty Kick Door Control Sensor, Kick Door Control Sensor harness is open or shorted, Kick Door Control Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B2205 2013 Toyota RAV4 Description
What are the Possible Causes of the DTC B2205 2013 Toyota RAV4?
- Faulty Kick Door Control Sensor
- Kick Door Control Sensor harness is open or shorted
- Kick Door Control Sensor circuit poor electrical connection
- Faulty Multiplex Network Door ECU
How to Fix the DTC B2205 2013 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B2205 2013 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B2205 2013 Toyota RAV4 code?
Need more information on how to fix the B2205 2013 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2205 2013 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B2205 2013 Toyota RAV4 Code
What does the OBDII code B2205 mean on a 2013 Toyota RAV4?
B2205 indicates an issue with the kick sensor circuit, which is typically associated with the hands-free tailgate system.
What are the common symptoms of code B2205 in a 2013 Toyota RAV4?
Symptoms may include the hands-free tailgate not responding, intermittent operation, or complete failure of the kick sensor system.
What causes the B2205 kick sensor circuit code to appear?
Common causes include a faulty kick sensor, damaged wiring, loose connections, or issues with the control module for the tailgate system.
How do you fix the B2205 code on a 2013 Toyota RAV4?
Repairs may involve inspecting and replacing the kick sensor, checking wiring and connections, or reprogramming the control module if necessary.
Can I drive my 2013 Toyota RAV4 with the B2205 code active?
Yes, you can drive the vehicle, as this code typically affects only the hands-free tailgate system and does not impact drivability.
How do you diagnose the B2205 code in a 2013 Toyota RAV4?
Diagnosis includes scanning the vehicle with an OBDII tool, inspecting the kick sensor and associated wiring, and testing the circuit for continuity or shorts.
Does the B2205 code require professional repair?
While basic troubleshooting like checking connections can be done by a DIYer, complex repairs or module programming may require a professional technician.
What tools are needed to address the B2205 code?
You may need an OBDII scanner, multimeter for testing circuits, and possibly specialized tools for removing and replacing the kick sensor.
Can a dead battery cause the B2205 code in a 2013 Toyota RAV4?
A dead or disconnected battery can sometimes reset or disrupt the tailgate system, but it is not a common cause for this specific code.
How much does it cost to fix the B2205 code in a 2013 Toyota RAV4?
Repair costs can vary but may range from $100 to $500 depending on whether the issue is a simple wiring fix or requires replacement of the kick sensor.
Discuss the causes and fixes for B2205 2013 Toyota RAV4 OBDII Code
Code B2205 2013 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
