AutoCodesJeep – B21F7 Jeep

B21F7 Jeep Code - Electronic Shifter Power Supply Circuit Short To Ground

Quick Answer

The Body Control Module (BCM) monitors the Electronic Shifter Power Supply Circuit. Common causes include Faulty Brake Lamp Switch, Brake Lamp Switch harness is open or shorted, Brake Lamp Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B21F7 Jeep indicates Electronic Shifter Power Supply Circuit Short To Ground.
Common causes
Common causes include Faulty Brake Lamp Switch, Brake Lamp Switch harness is open or shorted, Brake Lamp Switch circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 550
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Sep 30, 2019
💬 Need more help? Ask Coddy for instant answers — it's free!

Code B21F7 Jeep Description

The Body Control Module (BCM) monitors the Electronic Shifter Power Supply Circuit. When the Body Control Module (BCM) detects a short to ground on the Brake Lamp Switch Output circuit and the stop lamp switch is activated four times.
OBDII Code B21F7 Jeep - Electronic Shifter Power Supply Circuit Short To Ground - AutoCodes.com
B21F7 Jeep Code - Electronic Shifter Power Supply Circuit Short To Ground

What are the Possible Causes of the DTC B21F7 Jeep?

  • Faulty Brake Lamp Switch
  • Brake Lamp Switch harness is open or shorted
  • Brake Lamp Switch circuit poor electrical connection
  • Faulty Body Control Module (BCM)

How to Fix the DTC B21F7 Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B21F7 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B21F7 Jeep code?

Need more information on how to fix the B21F7 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B21F7 Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B21F7 Jeep Code

1. What does the OBDII code B21F7 mean on a Jeep?

The code B21F7 indicates an issue with the Electronic Shifter Power Supply Circuit, specifically a short to ground.

2. What are the symptoms of code B21F7 in a Jeep?

Common symptoms include the electronic shifter not functioning, intermittent shifting issues, or the vehicle being stuck in a specific gear.

3. What causes the B21F7 code to appear on a Jeep?

This code is typically caused by damaged wiring, a shorted circuit, a faulty electronic shifter module, or a blown fuse in the power supply circuit.

4. Can I still drive my Jeep with the B21F7 code?

It is not recommended to drive with this code as it may lead to further damage to the electronic shifter system or leave the vehicle unable to shift gears.

5. How do I diagnose the B21F7 code on a Jeep?

Start by inspecting the wiring and connectors for damage or corrosion, check for blown fuses, and test the electronic shifter module for faults.

6. Is a short to ground dangerous for my Jeep’s electronic shifter system?

Yes, a short to ground can prevent the electronic shifter from operating correctly and may cause electrical damage over time.

7. How do I fix the B21F7 code in my Jeep?

Repair or replace damaged wiring, clear any shorts, replace blown fuses, and, if necessary, replace the electronic shifter module.

8. How much does it cost to fix the B21F7 code on a Jeep?

Repair costs can vary, but fixing wiring issues typically ranges from $100 to $300. Replacing the electronic shifter module may cost $500 or more.

9. Can a bad battery cause the B21F7 code in a Jeep?

While uncommon, a weak or failing battery can sometimes contribute to electrical issues, so it’s worth checking the battery as part of the diagnosis.

10. Do I need a professional to fix the B21F7 code on my Jeep?

If you’re comfortable with electrical diagnostics and repairs, you can try fixing it yourself. However, a professional mechanic is recommended for complex issues.

Discuss the causes and fixes for B21F7 Jeep OBDII Code

Code B21F7 Jeep comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play