AutoCodes – Chrysler – B219A Chrysler

B219A Chrysler Code - Ignition Unlock Run/Start Control Circuit Overcurrent

Quick Answer

The Totally Integrated Power Module (TIPM) monitors the Ignition Unlock Run/Start Control Circuit. Common causes include Faulty Ignition Switch, Ignition Switch harness is open or shorted, Ignition Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B219A Chrysler indicates Ignition Unlock Run/Start Control Circuit Overcurrent.
Common causes: Common causes include Faulty Ignition Switch, Ignition Switch harness is open or shorted, Ignition Switch circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,554

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 30, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B219A Chrysler Description

The Totally Integrated Power Module (TIPM) monitors the Ignition Unlock Run/Start Control Circuit. The TIPM sets the OBDII code when an overcurrent condition is detected on the Fused Ignition Switch Output (Off-Run-Start) circuit.

OBDII Code B219A Chrysler - Ignition Unlock Run/Start Control Circuit Overcurrent - AutoCodes.com — B219A Chrysler Code - Ignition Unlock Run/Start Control Circuit Overcurrent

What does this mean?

What are the Possible Causes of the DTC B219A Chrysler?

Faulty Ignition Switch
Ignition Switch harness is open or shorted
Ignition Switch circuit poor electrical connection
Faulty Totally Integrated Power Module (TIPM)

How to Fix the DTC B219A Chrysler?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B219A Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B219A Chrysler code?

Need more information on how to fix the B219A Chrysler code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B219A Chrysler code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B219A Chrysler Code

1. What does OBDII code B219A mean on a Chrysler vehicle?

Code B219A indicates an overcurrent condition in the Ignition Unlock Run/Start Control Circuit, which is responsible for managing the ignition system's power distribution.

2. What are the common symptoms of code B219A in a Chrysler?

Symptoms may include difficulty starting the vehicle, intermittent stalls, warning lights on the dashboard, or unresponsive ignition components.

3. What causes the B219A code to appear in a Chrysler?

Common causes include a short circuit in the wiring, a faulty ignition switch, a damaged relay, or issues in the ignition module.

4. Can a dead battery trigger the B219A code?

A weak or dead battery is unlikely to directly cause the code, but electrical issues or voltage irregularities can contribute to similar symptoms.

5. How do I diagnose the B219A code on a Chrysler?

Start by inspecting the ignition circuit wiring and connectors for damage or corrosion, test the ignition switch and relay with a multimeter, and check for any short circuits.

6. Is it safe to drive with the B219A code active?

Driving with this code is not recommended, as it may lead to engine stalls or failure to start, potentially leaving you stranded.

7. How can I fix the B219A code on a Chrysler?

Repairs may involve replacing damaged wiring, repairing short circuits, replacing the ignition switch or relay, or reprogramming the ignition module if necessary.

8. Does the B219A code require professional repair?

While minor wiring issues can be addressed by experienced DIYers, diagnosing and repairing complex electrical problems or reprogramming may require professional assistance.

9. Will disconnecting the battery clear the B219A code?

Disconnecting the battery may clear the code temporarily, but the underlying issue must be resolved to prevent the code from returning.

10. How much does it cost to fix the B219A code on a Chrysler?

Repair costs vary depending on the specific issue, ranging from $50 for a simple wiring repair to $300 or more for ignition switch or module replacement.