AutoCodes – Chrysler – B2182 Chrysler

B2182 Chrysler Code - Heated Seat Module Power Supply High

Quick Answer

This Diagnostic Trouble Code (DTC) is set immediately if the Heated Seat Module detects voltage over 16.0 volts on the Fused Ignition Switch Output (Run) circuit. Common causes include Charging system high, Faulty Heated Seat Module, Heated Seat Module harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B2182 Chrysler indicates Heated Seat Module Power Supply High.
Common causes: Common causes include Charging system high, Faulty Heated Seat Module, Heated Seat Module harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 558

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 25, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B2182 Chrysler Description

This Diagnostic Trouble Code (DTC) is set immediately if the Heated Seat Module detects voltage over 16.0 volts on the Fused Ignition Switch Output (Run) circuit.

OBDII Code B2182 Chrysler - Heated Seat Module Power Supply High - AutoCodes.com — B2182 Chrysler Code - Heated Seat Module Power Supply High

What does this mean?

What are the Possible Causes of the DTC B2182 Chrysler?

Charging system high
Faulty Heated Seat Module
Heated Seat Module harness is open or shorted
Heated Seat Module circuit poor electrical connection

How to Fix the DTC B2182 Chrysler?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B2182 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B2182 Chrysler code?

Need more information on how to fix the B2182 Chrysler code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B2182 Chrysler code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B2182 Chrysler Code

1. What are the common symptoms of OBDII code B2182 in a Chrysler related to the Heated Seat Module Power Supply High?

The common symptoms include non-functioning heated seats, overheating of the seat, or a warning light on the dashboard indicating an issue with the heated seats.

2. What are the possible causes of OBDII code B2182 in a Chrysler?

Possible causes of this code include a faulty heated seat module, a short circuit in the heated seat wiring, or a problem with the power supply to the heated seat module.

3. How can I diagnose the issue causing OBDII code B2182 in my Chrysler?

To diagnose the issue, you can use an OBDII scanner to read the fault code and further investigate the heated seat module, wiring, and power supply for any visible damage or issues.

4. Is it safe to continue driving with OBDII code B2182 related to the Heated Seat Module Power Supply High?

It is not recommended to continue driving with this issue, as it may lead to further damage or safety hazards related to the heated seats in your Chrysler.

5. Can I repair OBDII code B2182 in my Chrysler myself?

Depending on your skill level and access to tools, you may be able to repair this issue yourself by inspecting the heated seat module, checking the wiring for any issues, and ensuring the power supply is functioning correctly.

6. Are there any simple troubleshooting steps I can take for OBDII code B2182 before seeking professional help?

You can start by checking the fuse related to the heated seats, inspecting the wiring for any visible damage, and resetting the system by disconnecting the battery for a few minutes.

7. Will resetting the OBDII code B2182 in my Chrysler make the issue go away permanently?

Resetting the code may clear the warning light temporarily, but if the underlying issue causing the code is not addressed, it is likely to reappear.

8. How much does it typically cost to repair OBDII code B2182 related to the Heated Seat Module Power Supply High in a Chrysler?

The cost of repair can vary depending on the exact cause of the issue, but it may involve replacing the heated seat module, repairing wiring, or addressing power supply issues, which can range from moderate to high costs.

9. Can extreme weather conditions contribute to triggering OBDII code B2182 in a Chrysler?

Extreme cold or heat can potentially affect the performance of the heated seat module and related components, leading to issues that trigger the OBDII code B2182.

10. Is it necessary to visit a dealership for diagnosing and repairing OBDII code B2182 in a Chrysler, or can an independent mechanic handle it?

While dealerships may have specialized knowledge, an independent mechanic with experience in automotive electronics should be able to diagnose and repair OBDII code B2182 in a Chrysler effectively.