B2120 Jeep Code - Ignition Run/Acc/Pad Control Circuit Open
Quick Answer
The Front Control Module monitors the Ignition Run/ACC/Pad Control Circuit. Common causes include Faulty Accessory Delay Relay, Accessory Delay Relay harness is open or shorted, Accessory Delay Relay circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2120 Jeep indicates Ignition Run/Acc/Pad Control Circuit Open.
- Common causes
- Common causes include Faulty Accessory Delay Relay, Accessory Delay Relay harness is open or shorted, Accessory Delay Relay circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B2120 Jeep Description
What are the Possible Causes of the DTC B2120 Jeep?
- Faulty Accessory Delay Relay
- Accessory Delay Relay harness is open or shorted
- Accessory Delay Relay circuit poor electrical connection
- Faulty Front Control Module (FCM)
How to Fix the DTC B2120 Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B2120 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B2120 Jeep code?
Need more information on how to fix the B2120 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2120 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B2120 Jeep Code
1. What are the common symptoms of OBDII code B2120 in a Jeep?
- Common symptoms include issues with starting the vehicle, malfunctioning ignition components, and possible stalling while driving.
2. What does the OBDII code B2120 Jeep indicate?
- The code B2120 indicates that there is an open circuit in the ignition run/acc/pad control circuit of the vehicle.
3. What are the possible causes of the ignition run/acc/pad control circuit open in a Jeep?
- Possible causes include damaged wiring, faulty ignition switch, corroded connectors, or a malfunctioning ignition module.
4. How can I diagnose the issue related to OBDII code B2120 in my Jeep?
- Diagnosing the issue may involve inspecting the wiring for damages, testing the ignition switch for functionality, and checking the connectors for corrosion.
5. Can I still drive my Jeep with the OBDII code B2120 present?
- It is not recommended to drive the vehicle with this code present, as it can lead to potential starting or stalling issues while driving.
6. How can I repair the ignition run/acc/pad control circuit open in my Jeep?
- Repairing the issue may involve repairing or replacing damaged wiring, replacing the faulty ignition switch, cleaning or replacing corroded connectors, or fixing the malfunctioning ignition module.
7. Is it necessary to reset the OBDII code B2120 after repairing the issue in my Jeep?
- Yes, it is recommended to reset the code using an OBDII scanner after repairing the issue to clear the fault codes from the vehicle's system.
8. Can weather conditions affect the ignition run/acc/pad control circuit in a Jeep?
- Yes, extreme weather conditions such as moisture or extreme heat can contribute to corrosion or damage in the wiring or connectors, leading to the circuit being open.
9. How long does it typically take to repair the ignition run/acc/pad control circuit issue in a Jeep?
- The repair time can vary depending on the specific cause of the issue, but it may take anywhere from a few hours to a full day to diagnose and fix the problem.
10. Will the OBDII code B2120 cause the check engine light to illuminate in my Jeep?
- Yes, the presence of the OBDII code B2120 will trigger the check engine light to illuminate on the vehicle's dashboard.
Discuss the causes and fixes for B2120 Jeep OBDII Code
Code B2120 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
