AutoCodesJeep – B2113 Jeep

B2113 Jeep Code - 5 Volt Supply Circuit Low

Quick Answer

The Front Control Module monitors the A/C Pressure Transducer 5-Volt Supply Circuit. Common causes include Faulty A/C Pressure Transducer, A/C Pressure Transducer harness is open or shorted, A/C Pressure Transducer circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B2113 Jeep indicates 5 Volt Supply Circuit Low.
Common causes
Common causes include Faulty A/C Pressure Transducer, A/C Pressure Transducer harness is open or shorted, A/C Pressure Transducer circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 1,461
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Sep 17, 2019
💬 Need more help? Ask Coddy for instant answers — it's free!

Code B2113 Jeep Description

The Front Control Module monitors the A/C Pressure Transducer 5-Volt Supply Circuit. The Front Control Module sets the OBDII code when it detects the 5 volt supply circuit voltage above 5.0 volts.
OBDII Code B2113 Jeep - 5 Volt Supply Circuit Low - AutoCodes.com
B2113 Jeep Code - 5 Volt Supply Circuit Low

What are the Possible Causes of the DTC B2113 Jeep?

  • Faulty A/C Pressure Transducer
  • A/C Pressure Transducer harness is open or shorted
  • A/C Pressure Transducer circuit poor electrical connection
  • Faulty Front Control Module (FCM)

How to Fix the DTC B2113 Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B2113 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B2113 Jeep code?

Need more information on how to fix the B2113 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B2113 Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B2113 Jeep Code

What does the OBDII code B2113 mean for a Jeep?

B2113 indicates a fault in the 5 Volt supply circuit, typically related to the body control module (BCM) or other connected sensors that require a 5V reference voltage.

What are common symptoms of the B2113 code?

Symptoms may include warning lights on the dashboard, malfunctioning electrical components, issues with the vehicle's central locking system, or problems with other body functions controlled by the BCM.

What causes the B2113 code to trigger?

Common causes include a short circuit in the wiring, a faulty body control module, damaged connectors, or issues with sensors that operate on the 5V supply.

How can I diagnose the B2113 code?

To diagnose, use an OBD-II scanner to confirm the code, then inspect the wiring and connectors related to the BCM and any sensors that utilize the 5V supply for damage or corrosion.

What are some repair tips for fixing the B2113 code?

Repairs may involve checking and repairing wiring harnesses for shorts or breaks, replacing damaged connectors, or replacing the BCM if it is found to be faulty.

Can I clear the B2113 code myself?

Yes, you can clear the code using an OBD-II scanner, but it's important to address the underlying issue to prevent the code from returning.

Is it safe to drive my Jeep with the B2113 code active?

While it may be safe to drive, you might experience electrical malfunctions or failures in components controlled by the BCM, so it's best to have the issue diagnosed and repaired promptly.

How much does it typically cost to fix the B2113 code?

Repair costs vary widely based on the specific issue, ranging from $50 to $400 or more, depending on whether it involves simple wiring repairs or replacement of the BCM.

Will the B2113 code affect my vehicle’s performance?

While the code primarily relates to electrical systems, it may indirectly affect performance if critical components are not functioning correctly, leading to potential safety issues.

Discuss the causes and fixes for B2113 Jeep OBDII Code

Code B2113 Jeep comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play