B210B Code - Starter Control Relay ON
Quick Answer
The Starter control relay, integrated in Intelligent Power Distribution Module (IPDM) Engine Room (E/R), permits the starter relay operation when in N or P position and the steering is locked or unlocked. Common causes include Faulty Intelligent Power Distribution Module (IPDM), Intelligent Power Distribution Module (IPDM) harness is open or shorted, Intelligent Power Distribution Module (IPDM) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B210B indicates Starter Control Relay ON.
- Common causes
- Common causes include Faulty Intelligent Power Distribution Module (IPDM), Intelligent Power Distribution Module (IPDM) harness is open or shorted, Intelligent Power Distribution Module (IPDM) circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B210B Description
What are the Possible Causes of the DTC B210B?
- Faulty Intelligent Power Distribution Module (IPDM)
- Intelligent Power Distribution Module (IPDM) harness is open or shorted
- Intelligent Power Distribution Module (IPDM) circuit poor electrical connection
How to Fix the DTC B210B?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B210B code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B210B code?
Need more information on how to fix the B210B code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B210B code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- B210B Chrysler — System Voltage High
- B210B Dodge — System Voltage High
- B210B Infiniti — Starter Control Relay ON
- B210B Jeep — System Voltage High
- B210B Nissan — Starter Control Relay ON
- B210B RAM — System Voltage High
Frequently Asked Questions about B210B Code
1. What does the OBDII code B210B mean?
B210B indicates an issue with the Starter Control Relay, specifically that it is stuck in the "ON" position when it shouldn't be.
2. What are the common symptoms of the B210B code?
Symptoms may include difficulty starting the vehicle, the starter motor running continuously, or the engine cranking even after the ignition is turned off.
3. What causes the B210B code to appear?
Common causes include a faulty starter control relay, damaged wiring or connectors, a short circuit, or an issue with the ignition switch.
4. Can a bad battery cause the B210B code?
While a weak battery can cause starting issues, it is unlikely to directly trigger the B210B code. This code is typically related to relay or wiring problems.
5. How is the B210B code diagnosed?
A mechanic will inspect the starter control relay, check for wiring damage, test the relay for proper operation, and ensure the ignition circuit is functioning correctly.
6. Can I drive with the B210B code active?
Driving with this code is not recommended, as a stuck starter relay can lead to overheating of the starter motor or electrical damage.
7. How do you fix the B210B code?
Repairs may involve replacing the faulty starter control relay, fixing damaged wiring, or addressing issues with the ignition switch or related circuits.
8. How much does it cost to repair the B210B code?
The repair cost varies depending on the specific issue but typically ranges from $100 to $300, including parts and labor.
9. Can I reset the B210B code without fixing the problem?
Resetting the code without addressing the underlying issue is not recommended, as the problem will likely return and may cause further damage.
10. What happens if the B210B code is ignored?
Ignoring this code can lead to starter motor damage, electrical system failure, or a drained battery, potentially leaving you stranded.
Discuss the causes and fixes for B210B OBDII Code
Code B210B comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
