AutoCodesNissan – B2099 Nissan

B2099 Nissan Code - Ignition Relay OFF Stuck

Quick Answer

The Intelligent Power Distribution Module (IPDM) Engine Room (E/R) operates the ignition relay when it receives an ignition switch ON signal from Body Control Module (BCM) via CAN communication. Common causes include Faulty Ignition Relay, Ignition Relay harness is open or shorted, Ignition Relay circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B2099 Nissan indicates Ignition Relay OFF Stuck.
Common causes
Common causes include Faulty Ignition Relay, Ignition Relay harness is open or shorted, Ignition Relay circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 24,547
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Sep 16, 2019
💬 Need more help? Ask Coddy for instant answers — it's free!

Code B2099 Nissan Description

The Intelligent Power Distribution Module (IPDM) Engine Room (E/R) operates the ignition relay when it receives an ignition switch ON signal from Body Control Module (BCM) via CAN communication. The OBDII code sets when the ignition relay OFF is detected for 1 second at ignition switch ON (CPU monitors the status at the contact and excitation coil circuits of the ignition relay inside it).
OBDII Code B2099 Nissan - Ignition Relay OFF Stuck - AutoCodes.com
B2099 Nissan Code - Ignition Relay OFF Stuck

What are the Possible Causes of the DTC B2099 Nissan?

  • Faulty Ignition Relay
  • Ignition Relay harness is open or shorted
  • Ignition Relay circuit poor electrical connection
  • Faulty Intelligent Power Distribution Module (IPDM)

How to Fix the DTC B2099 Nissan?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B2099 Nissan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B2099 Nissan code?

Need more information on how to fix the B2099 Nissan code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B2099 Nissan code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B2099 Nissan Code

1. What are the common symptoms of OBDII code B2099 - Ignition Relay OFF Stuck in a Nissan?

The common symptoms include difficulty starting the vehicle, engine stalling, and dashboard warning lights related to the ignition system.

2. What can cause the OBDII code B2099 in a Nissan?

The code B2099 is typically caused by a faulty ignition relay, a wiring issue in the ignition circuit, or a malfunctioning ignition switch.

3. How can I diagnose the Ignition Relay OFF Stuck issue in my Nissan?

To diagnose the issue, you can use an OBDII scanner to retrieve the specific trouble code, inspect the ignition relay, check the wiring for any damage, and test the ignition switch's functionality.

4. Can I drive my Nissan with the B2099 code present?

It is not recommended to drive your Nissan with the B2099 code present as it can lead to potential starting and stalling issues, compromising the vehicle's safety and reliability.

5. How can I repair the Ignition Relay OFF Stuck issue in my Nissan?

Repairing the issue involves replacing the faulty ignition relay, repairing any damaged wiring in the ignition circuit, or replacing the malfunctioning ignition switch.

6. Are there any DIY tips for fixing the B2099 code in a Nissan?

While basic troubleshooting like checking the relay and wiring can be done DIY, it is recommended to consult a professional mechanic for proper diagnosis and repair of the Ignition Relay OFF Stuck issue.

7. Can a weak battery cause the B2099 code in a Nissan?

A weak or failing battery can potentially trigger the B2099 code due to insufficient power supply to the ignition system, leading to issues with starting and engine operation.

8. Is the B2099 code specific to Nissan vehicles only?

The B2099 code is specific to Nissan vehicles and relates to the Ignition Relay OFF Stuck issue within the Nissan's onboard diagnostic system.

9. Will resetting the OBDII system clear the B2099 code in my Nissan?

Resetting the OBDII system may temporarily clear the B2099 code, but if the underlying issue with the ignition relay or circuit persists, the code is likely to reappear.

10. How much does it typically cost to repair the B2099 code in a Nissan?

The cost of repairing the B2099 code in a Nissan can vary depending on the specific cause of the issue, but it may range from $100 to $300 for parts and labor.

Discuss the causes and fixes for B2099 Nissan OBDII Code

  • Boa tarde, olha estou tendo problema com o Nissan Dualis 2.0 de 2008, gasolina, contudo, ele funciona o motor cem problemas, mas durante a marcha para de acelerar, mas quando desligo o motor e ligo e acelera. faz isso por varias vezes. desligo e ligo anda. como resolver.

    • Boa tarde! Isso que você descreveu no seu Nissan Dualis 2.0 2008 (também conhecido como Nissan Qashqai em alguns mercados) parece estar relacionado a um modo de segurança (modo de emergência) que o carro entra quando detecta uma falha, especialmente no sistema eletrônico do acelerador.

      Se o motor funciona normal ao ligar, mas para de acelerar durante a marcha e só volta a funcionar ao desligar e ligar de novo, pode ser:

      • Problema no corpo de borboleta eletrônico (sujo ou com defeito)
      • Sensor de posição do pedal do acelerador (APP sensor) com falha intermitente
      • Sensor de posição do corpo de borboleta (TPS)
      • Chicote ou conectores soltos ou oxidados
      • Falha no módulo de controle (ECM)

      Recomendo escanear o carro com um scanner que leia falhas no sistema do acelerador e veja se aparece algum código relacionado além do B2099. Verifique também o estado da bateria e do sistema de aterramento, pois tensão instável pode causar esse tipo de comportamento eletrônico.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play