B2065 Code - Distance Control ECU Malfunction
Quick Answer
The Diagnostic Trouble Code (DTC) is set if Seat Belt Control ECU determines the collision determination of the distance control ECU is abnormal. Common causes include Faulty Dynamic radar cruise control system, Faulty Seat Belt Control ECU. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2065 indicates Distance Control ECU Malfunction.
- Common causes
- Common causes include Faulty Dynamic radar cruise control system, Faulty Seat Belt Control ECU.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B2065 Description
What are the Possible Causes of the DTC B2065?
- Faulty Dynamic radar cruise control system
- Faulty Seat Belt Control ECU
How to Fix the DTC B2065?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B2065 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B2065 code?
Need more information on how to fix the B2065 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2065 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- B2065 Lexus — Distance Control ECU Malfunction
- B2065 Scion — Distance Control ECU Malfunction
- B2065 Toyota — Distance Control ECU Malfunction
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B2065 Code
1. What does the OBDII code B2065 mean?
B2065 indicates a malfunction in the Distance Control ECU, which is responsible for managing adaptive cruise control or collision avoidance systems.
2. What are the common symptoms of a B2065 code?
Symptoms may include the adaptive cruise control not working, warning lights on the dashboard, or a loss of collision warning functionality.
3. What causes the B2065 code to appear?
Common causes include a faulty Distance Control ECU, damaged wiring or connectors, software issues, or sensor misalignment.
4. Can I still drive my car with a B2065 code?
Yes, you can usually drive the car, but features like adaptive cruise control or collision prevention may not function correctly.
5. How is the B2065 code diagnosed?
A mechanic will use a scan tool to confirm the code, inspect the Distance Control ECU, check for wiring or connector damage, and verify sensor alignment.
6. How do I fix the B2065 code?
Repairs may involve replacing the Distance Control ECU, repairing damaged wiring, updating software, or realigning sensors.
7. How much does it cost to fix a B2065 code?
Repair costs vary depending on the issue but can range from $200 to $1,200, especially if the ECU needs replacement.
8. Can a B2065 code be triggered by a dead battery?
Yes, a weak or dead battery can sometimes cause communication errors with the Distance Control ECU, leading to this code.
9. Will clearing the B2065 code fix the problem?
Clearing the code without addressing the underlying issue will likely result in the code returning.
10. Can a software update fix the B2065 code?
In some cases, a software update for the ECU may resolve the issue if it’s caused by a programming error. Always consult a professional.
Discuss the causes and fixes for B2065 OBDII Code
Code B2065 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
