B2060 Scion Code - ABS Malfunction
Quick Answer
This Diagnostic Trouble Code (DTC) is stored when a malfunction in the vehicle stability control system is detected. Common causes include Faulty Vehicle stability control system, Faulty Seat Belt Control ECU. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2060 Scion indicates ABS Malfunction.
- Common causes
- Common causes include Faulty Vehicle stability control system, Faulty Seat Belt Control ECU.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B2060 Scion Description
What are the Possible Causes of the DTC B2060 Scion?
- Faulty Vehicle stability control system
- Faulty Seat Belt Control ECU
How to Fix the DTC B2060 Scion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B2060 Scion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B2060 Scion code?
Need more information on how to fix the B2060 Scion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2060 Scion code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B2060 Scion Code
1. What are common symptoms of OBDII code B2060 for ABS malfunction in a Scion?
Common symptoms include the ABS warning light illuminating on the dashboard, loss of ABS functionality, and potential issues with braking performance.
2. What could be causing the OBDII code B2060 in a Scion related to ABS malfunction?
Possible causes of the ABS malfunction code B2060 include faulty ABS sensors, damaged wiring or connectors in the ABS system, or a malfunctioning ABS control module.
3. How can I diagnose the OBDII code B2060 in my Scion for ABS malfunction?
Diagnosis typically involves using an OBDII scanner to read the specific error code, inspecting the ABS sensors and wiring for damage, and testing the ABS control module for functionality.
4. Can I continue driving my Scion with OBDII code B2060 for ABS malfunction?
It is not recommended to drive the vehicle with the ABS malfunction code B2060, as it can affect the vehicle's braking performance and safety.
5. How can I repair OBDII code B2060 for ABS malfunction in my Scion?
Repairing the ABS malfunction code B2060 may involve replacing faulty ABS sensors, repairing damaged wiring or connectors, or replacing the ABS control module, depending on the specific cause of the issue.
6. Are there any DIY tips for troubleshooting OBDII code B2060 in a Scion for ABS malfunction?
DIY enthusiasts can start by visually inspecting the ABS sensors and wiring for any visible damage, ensuring proper connections, and clearing the error code with an OBDII scanner to see if it returns.
7. Is it safe to reset the OBDII code B2060 for ABS malfunction in my Scion without repairing the issue?
While you can reset the error code to clear the ABS warning light temporarily, it is crucial to diagnose and repair the underlying issue causing the ABS malfunction to ensure safe driving.
8. Will OBDII code B2060 for ABS malfunction cause my Scion to fail a vehicle inspection?
In most cases, a vehicle with an active ABS malfunction code like B2060 will fail a vehicle inspection due to safety concerns related to braking performance.
9. How much does it typically cost to repair OBDII code B2060 for ABS malfunction in a Scion?
The cost of repairing the ABS malfunction code B2060 can vary depending on the specific cause of the issue, but it may range from a few hundred to a couple of thousand dollars, including parts and labor.
10. Can a professional mechanic help diagnose and repair OBDII code B2060 for ABS malfunction in my Scion?
Yes, consulting a professional mechanic or technician with experience in ABS systems can help accurately diagnose and repair the ABS malfunction code B2060 in your Scion to ensure proper functionality and safety.
Discuss the causes and fixes for B2060 Scion OBDII Code
Code B2060 Scion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
