B2016 Toyota Code - Open in Right Side Lower MOS
Quick Answer
The Seat Belt Control ECU receives information from the master cylinder solenoid (Skid Control ECU) via the Controlled Are Network (CAN) communication line and tightens the seat belt by operating the motor in the Front Seat Outer Belt Assembly Right (RH) or Left (LH). Common causes include Faulty Seat Belt Control ECU, Seat Belt Control ECU harness is open or shorted, Seat Belt Control ECU circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2016 Toyota indicates Open in Right Side Lower MOS.
- Common causes
- Common causes include Faulty Seat Belt Control ECU, Seat Belt Control ECU harness is open or shorted, Seat Belt Control ECU circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B2016 Toyota Description
What are the Possible Causes of the DTC B2016 Toyota?
- Faulty Seat Belt Control ECU
- Seat Belt Control ECU harness is open or shorted
- Seat Belt Control ECU circuit poor electrical connection
How to Fix the DTC B2016 Toyota?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B2016 Toyota code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B2016 Toyota code?
Need more information on how to fix the B2016 Toyota code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2016 Toyota code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B2016 Toyota Code
1. What are the common symptoms of OBDII code B2016 in a Toyota related to an open in the right side lower MOS circuit?
- Common symptoms include malfunctions in the right side lower MOS (Metal-Oxide-Semiconductor) circuit, affecting the vehicle's electrical system.
2. What can cause the OBDII code B2016 in a Toyota indicating an open in the right side lower MOS?
- The code B2016 can be triggered by issues such as damaged wiring, loose connections, or a faulty MOSFET (Metal-Oxide-Semiconductor Field-Effect Transistor) in the circuit.
3. How can I diagnose the source of the open in the right side lower MOS circuit triggering code B2016 in my Toyota?
- Use a multimeter to test the continuity of the wiring, check for loose connections, and inspect the MOSFET for any signs of damage or malfunction.
4. Is it safe to continue driving with OBDII code B2016 related to an open in the right side lower MOS in a Toyota?
- It is advisable to address the issue promptly to prevent further electrical problems or potential system failures while driving.
5. Can I repair the open in the right side lower MOS circuit causing code B2016 in my Toyota myself?
- Depending on your skill level, you may be able to repair the issue by fixing the wiring, securing connections, or replacing the faulty MOSFET. However, professional assistance may be necessary for more complex repairs.
6. How much does it typically cost to fix OBDII code B2016 due to an open in the right side lower MOS in a Toyota?
- The cost of repair can vary depending on the extent of the issue and whether any components need replacement. It is recommended to obtain quotes from automotive professionals for an accurate estimate.
7. Can resetting the OBDII system clear the B2016 code related to an open in the right side lower MOS in a Toyota?
- Resetting the OBDII system may temporarily clear the code, but it is crucial to address the underlying issue causing the fault code to prevent it from reoccurring.
8. Are there any preventive measures to avoid encountering OBDII code B2016 in a Toyota due to an open in the right side lower MOS circuit?
- Routine inspections of the electrical system, avoiding water damage to wiring, and ensuring proper installation of components can help prevent issues leading to code B2016.
9. Will OBDII code B2016 in a Toyota affecting the right side lower MOS impact the vehicle's performance?
- While the code itself may not directly impact performance, unresolved electrical issues can lead to system malfunctions that may affect the vehicle's overall performance.
10. How urgent is it to address OBDII code B2016 indicating an open in the right side lower MOS in a Toyota?
- It is recommended to address the issue promptly to prevent potential electrical failures or safety hazards associated with the malfunctioning circuit.
Discuss the causes and fixes for B2016 Toyota OBDII Code
Code B2016 Toyota comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
