AutoCodesJeep – B1E96 Jeep

B1E96 Jeep Code - Left Folding Seat Not Learned

Quick Answer

The Power Rear Folding Seat Module monitors the Left Seat Latch Switch. Common causes include Faulty Left Seat Latch Switch, Left Seat Latch Switch harness is open or shorted, Left Seat Latch Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B1E96 Jeep indicates Left Folding Seat Not Learned.
Common causes
Common causes include Faulty Left Seat Latch Switch, Left Seat Latch Switch harness is open or shorted, Left Seat Latch Switch circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 512
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Sep 04, 2019
💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1E96 Jeep Description

The Power Rear Folding Seat Module monitors the Left Seat Latch Switch. If the Power Rear Folding Seat Module does not detect after one second that the latch switches are closed after the seat reaches it is Normal position, this Diagnostic Trouble Code (DTC) will set.
OBDII Code B1E96 Jeep - Left Folding Seat Not Learned - AutoCodes.com
B1E96 Jeep Code - Left Folding Seat Not Learned

What are the Possible Causes of the DTC B1E96 Jeep?

  • Faulty Left Seat Latch Switch
  • Left Seat Latch Switch harness is open or shorted
  • Left Seat Latch Switch circuit poor electrical connection
  • Faulty Left Power Rear Folding Seat Latch Actuator
  • Faulty Power Rear Folding Seat Module

How to Fix the DTC B1E96 Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1E96 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1E96 Jeep code?

Need more information on how to fix the B1E96 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1E96 Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1E96 Jeep Code

1. What does the OBDII code B1E96 mean on a Jeep?

The B1E96 code indicates that the left folding seat position has not been learned by the vehicle’s control module.

2. What are the symptoms of the B1E96 code in a Jeep?

Common symptoms include the left folding seat not folding or unfolding properly, or the seat moving erratically.

3. What causes the B1E96 code to appear?

This code is typically caused by an issue with the seat position sensor, improper calibration, or a failure in the seat motor or wiring.

4. Can I still drive my Jeep with the B1E96 code active?

Yes, the code does not affect drivability, but the left folding seat may not function as expected.

5. How can I fix the B1E96 code on my Jeep?

You can attempt to recalibrate the seat by following the manufacturer’s learning procedure or consult a professional to check the seat sensor and motor.

6. Is the B1E96 code specific to any Jeep models?

This code can appear on Jeep models equipped with power-folding seats, such as the Grand Cherokee or Wagoneer, but it’s not exclusive to a single model.

7. Does clearing the B1E96 code fix the problem?

Clearing the code may temporarily reset the system, but the underlying issue must be addressed to prevent it from returning.

8. How do I perform a seat learning procedure for the B1E96 code?

Refer to your vehicle’s owner’s manual or service manual for the specific steps to recalibrate the left folding seat.

9. Could a blown fuse cause the B1E96 code?

Yes, a blown fuse related to the seat motor or control module might trigger this code, so it’s worth checking.

10. When should I take my Jeep to a mechanic for the B1E96 code?

If recalibration doesn’t resolve the issue or you suspect a faulty component like the seat motor or wiring, it’s best to consult a professional.

Discuss the causes and fixes for B1E96 Jeep OBDII Code

Code B1E96 Jeep comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play