AutoCodesDodge – B1E96 Dodge

B1E96 Dodge Code - Left Folding Seat Not Learned

Quick Answer

The Power Rear Folding Seat Module monitors the Left Seat Latch Switch. Common causes include Faulty Left Seat Latch Switch, Left Seat Latch Switch harness is open or shorted, Left Seat Latch Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B1E96 Dodge indicates Left Folding Seat Not Learned.
Common causes
Common causes include Faulty Left Seat Latch Switch, Left Seat Latch Switch harness is open or shorted, Left Seat Latch Switch circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 592
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Sep 04, 2019
💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1E96 Dodge Description

The Power Rear Folding Seat Module monitors the Left Seat Latch Switch. If the Power Rear Folding Seat Module does not detect after one second that the latch switches are closed after the seat reaches it is Normal position, this Diagnostic Trouble Code (DTC) will set.
OBDII Code B1E96 Dodge - Left Folding Seat Not Learned - AutoCodes.com
B1E96 Dodge Code - Left Folding Seat Not Learned

What are the Possible Causes of the DTC B1E96 Dodge?

  • Faulty Left Seat Latch Switch
  • Left Seat Latch Switch harness is open or shorted
  • Left Seat Latch Switch circuit poor electrical connection
  • Faulty Left Power Rear Folding Seat Latch Actuator
  • Faulty Power Rear Folding Seat Module

How to Fix the DTC B1E96 Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1E96 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1E96 Dodge code?

Need more information on how to fix the B1E96 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1E96 Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1E96 Dodge Code

1. What does the OBDII code B1E96 mean on a Dodge vehicle?

The B1E96 code indicates that the left folding seat's position has not been properly learned by the vehicle's control module.

2. What are the symptoms of the B1E96 code?

Common symptoms include the left folding seat not operating as expected, failure to fold or unfold, or the seat being stuck in one position.

3. What causes the B1E96 code to appear?

The code is typically triggered by a failure in the seat's position sensor, calibration issues, or a fault in the seat control module.

4. How can I fix the B1E96 code on my Dodge?

You can try recalibrating the seat by following the procedure in the vehicle’s manual or using a diagnostic tool to relearn the seat position. If that fails, inspect the position sensor and wiring for damage.

5. Can a faulty motor cause the B1E96 code?

While uncommon, a defective seat motor can contribute to the issue if it prevents the seat from moving correctly during calibration.

6. Do I need special tools to fix the B1E96 code?

Yes, a diagnostic scanner capable of reading and clearing Dodge-specific codes may be needed to reset the system or perform a relearn procedure.

7. Can I drive with the B1E96 code active?

Yes, the code does not typically affect vehicle drivability, but it may limit the functionality of the left folding seat.

8. How much does it cost to repair the B1E96 code?

Repair costs vary depending on the cause, but sensor replacement or module reprogramming typically ranges from $100 to $300.

9. Will disconnecting the battery clear the B1E96 code?

Disconnecting the battery may temporarily clear the code, but it won’t resolve the underlying issue. A proper diagnosis and repair are necessary.

10. How do I prevent the B1E96 code from coming back?

Ensure the seat is used within its design limits, avoid obstructing its movement, and address sensor or wiring issues promptly.

Discuss the causes and fixes for B1E96 Dodge OBDII Code

Code B1E96 Dodge comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play