B1E96 Chrysler Code - Left Folding Seat Not Learned
Quick Answer
The Power Rear Folding Seat Module monitors the Left Seat Latch Switch. Common causes include Faulty Left Seat Latch Switch, Left Seat Latch Switch harness is open or shorted, Left Seat Latch Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1E96 Chrysler indicates Left Folding Seat Not Learned.
- Common causes
- Common causes include Faulty Left Seat Latch Switch, Left Seat Latch Switch harness is open or shorted, Left Seat Latch Switch circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1E96 Chrysler Description
What are the Possible Causes of the DTC B1E96 Chrysler?
- Faulty Left Seat Latch Switch
- Left Seat Latch Switch harness is open or shorted
- Left Seat Latch Switch circuit poor electrical connection
- Faulty Left Power Rear Folding Seat Latch Actuator
- Faulty Power Rear Folding Seat Module
How to Fix the DTC B1E96 Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1E96 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1E96 Chrysler code?
Need more information on how to fix the B1E96 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1E96 Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B1E96 Chrysler Code
1. What are the common symptoms of OBDII code B1E96 in a Chrysler related to the left folding seat not being learned?
The common symptoms include the left folding seat not moving or adjusting properly, and potential issues with the seat memory function.
2. What could be causing the OBDII code B1E96 to appear in a Chrysler for the left folding seat?
The code B1E96 may appear due to a malfunction in the seat control module, a wiring issue, a faulty seat motor, or problems with the memory module.
3. How can I diagnose the OBDII code B1E96 in my Chrysler for the left folding seat?
To diagnose the issue, you can use a diagnostic scanner to retrieve the specific fault code, inspect the wiring connected to the seat, and test the seat motor functionality.
4. What are some repair tips for fixing the OBDII code B1E96 related to the left folding seat in a Chrysler?
Repair tips may include checking and repairing any damaged wiring, resetting the seat memory system, calibrating the seat position, or replacing the seat control module if necessary.
5. Can I reset the OBDII code B1E96 in my Chrysler for the left folding seat myself?
You may be able to reset the code by disconnecting the car battery for a few minutes to clear the error code and then reconnecting it. However, it is important to diagnose and address the root cause of the issue to prevent the code from reappearing.
6. Is it safe to drive my Chrysler with the OBDII code B1E96 related to the left folding seat not being learned?
It is generally safe to drive the vehicle with this code, but it is recommended to address the issue promptly to ensure the proper functioning of the seat and the seat memory system.
7. How can I prevent the OBDII code B1E96 from appearing again in my Chrysler for the left folding seat?
Regularly checking and maintaining the seat adjustment system, avoiding overloading the seat, and addressing any issues promptly can help prevent the code from reappearing.
8. Are there any recalls or service bulletins related to the OBDII code B1E96 in Chrysler vehicles for the left folding seat issue?
Check with your local Chrysler dealership or visit the manufacturer's website to see if there are any recalls or service bulletins related to this specific OBDII code and seat issue.
9. Are there any aftermarket solutions available to fix the OBDII code B1E96 for the left folding seat in a Chrysler?
There may be aftermarket repair kits or replacement parts available for the seat control module, wiring harness, or motor to address the B1E96 code related to the left folding seat not being learned.
10. How much does it typically cost to repair the OBDII code B1E96 in a Chrysler for the left folding seat issue?
The cost of repairing the B1E96 code can vary depending on the specific cause of the issue, but it may involve diagnostic fees, replacement parts, and labor costs, which could range from a few hundred to over a thousand dollars.
Discuss the causes and fixes for B1E96 Chrysler OBDII Code
Code B1E96 Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
