B1E95 Jeep Code - Right Folding Seat Not Learned
Quick Answer
The Power Rear Folding Seat Module monitors the Right Seat Latch Switch. Common causes include Faulty Right Seat Latch Switch, Right Seat Latch Switch harness is open or shorted, Right Seat Latch Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1E95 Jeep indicates Right Folding Seat Not Learned.
- Common causes
- Common causes include Faulty Right Seat Latch Switch, Right Seat Latch Switch harness is open or shorted, Right Seat Latch Switch circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1E95 Jeep Description
What are the Possible Causes of the DTC B1E95 Jeep?
- Faulty Right Seat Latch Switch
- Right Seat Latch Switch harness is open or shorted
- Right Seat Latch Switch circuit poor electrical connection
- Faulty Right Power Rear Folding Seat Latch Actuator
- Faulty Power Rear Folding Seat Module
How to Fix the DTC B1E95 Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1E95 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1E95 Jeep code?
Need more information on how to fix the B1E95 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1E95 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B1E95 Jeep Code
1. What does the OBDII code B1E95 mean on a Jeep?
The code B1E95 indicates that the right folding seat has not been properly learned or calibrated by the vehicle's control module.
2. What are the common symptoms of the B1E95 code?
Symptoms may include the right folding seat not functioning properly, failure to fold or unfold as expected, or error messages related to the seat adjustment system.
3. What causes the B1E95 code to appear?
This code is usually triggered by an incomplete or failed calibration process for the right folding seat, often due to electrical issues, sensor malfunctions, or interrupted learning cycles.
4. How can I fix the B1E95 code on a Jeep?
You can clear the code by performing a recalibration of the right folding seat using a diagnostic scan tool or by following the seat learning procedure outlined in the vehicle’s manual.
5. Do I need special tools to resolve the B1E95 code?
Yes, a diagnostic scan tool capable of accessing the seat control module and initiating a seat learning process is typically required.
6. Can a dead battery cause the B1E95 code?
Yes, a dead or weak battery can interrupt the seat's calibration process, potentially triggering the B1E95 code.
7. Is the B1E95 code related to a mechanical issue with the seat?
Usually, it is an electronic or software-related issue, but in rare cases, a mechanical fault like a jammed seat mechanism could contribute to the problem.
8. Can I drive my Jeep with the B1E95 code active?
Yes, the code does not affect vehicle drivability, but the right folding seat may not function as intended.
9. Will disconnecting the battery clear the B1E95 code?
Disconnecting the battery might temporarily erase the code, but the issue is likely to return unless the seat is properly relearned.
10. When should I contact a professional for the B1E95 code?
If recalibrating the seat using a scan tool or manual procedure fails, or if the issue persists, consult a professional to inspect the seat motor, wiring, and control module.
Discuss the causes and fixes for B1E95 Jeep OBDII Code
Code B1E95 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
