B1E72 Jeep Code - Power Inverter Enable Control Circuit Short To Ground
Quick Answer
Once the 115 Volt A/C Power Outlet switch is pressed, a network communication message is sent to the Body Control Module (BCM) to enable the Power Inverter Module. Common causes include Faulty Power Inverter Module, Power Inverter Module harness is open or shorted, Power Inverter Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1E72 Jeep indicates Power Inverter Enable Control Circuit Short To Ground.
- Common causes
- Common causes include Faulty Power Inverter Module, Power Inverter Module harness is open or shorted, Power Inverter Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1E72 Jeep Description
What are the Possible Causes of the DTC B1E72 Jeep?
- Faulty Power Inverter Module
- Power Inverter Module harness is open or shorted
- Power Inverter Module circuit poor electrical connection
- Faulty Body Control Module (BCM)
How to Fix the DTC B1E72 Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1E72 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1E72 Jeep code?
Need more information on how to fix the B1E72 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1E72 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B1E72 Jeep Code
1. What are the common symptoms of OBDII code B1E72 in a Jeep related to the Power Inverter Enable Control Circuit Short To Ground?
The common symptoms include inoperative power inverter, illuminated warning light on the dashboard, and potential issues with electrical systems.
2. What can cause the Power Inverter Enable Control Circuit Short To Ground fault code B1E72 in a Jeep?
Possible causes include damaged wiring or connectors in the power inverter circuit, a short to ground in the control circuit, or a faulty power inverter module.
3. How serious is the OBDII code B1E72 related to the Power Inverter Enable Control Circuit Short To Ground in a Jeep?
While the vehicle may still operate, the inoperative power inverter can affect the performance and functionality of certain electrical components, so it's important to address the issue promptly.
4. Can I continue driving my Jeep with the B1E72 fault code related to the Power Inverter Enable Control Circuit Short To Ground?
It is not recommended to drive the vehicle with this fault code as it could lead to further electrical issues or component failures.
5. How can I diagnose and repair the B1E72 fault code in my Jeep related to the Power Inverter Enable Control Circuit Short To Ground?
Diagnosis involves inspecting the wiring, connectors, and power inverter module for any visible damage. Repair may involve repairing or replacing damaged components and clearing the fault code with a diagnostic tool.
6. Is it possible to reset the B1E72 fault code related to the Power Inverter Enable Control Circuit Short To Ground without fixing the underlying issue?
Resetting the fault code without addressing the root cause will only temporarily clear the warning light, and the issue will likely reoccur.
7. Can a DIY enthusiast fix the B1E72 fault code related to the Power Inverter Enable Control Circuit Short To Ground in a Jeep?
While some basic troubleshooting like checking for loose connections can be done by DIY enthusiasts, diagnosing and repairing the exact cause may require professional help due to the complexity of the electrical system.
8. How much does it typically cost to repair the OBDII code B1E72 in a Jeep related to the Power Inverter Enable Control Circuit Short To Ground?
The cost of repair can vary depending on the exact cause of the fault, but it may involve labor costs for diagnosis and repair, as well as the cost of any replacement parts needed.
9. Are there any preventive measures to avoid encountering the B1E72 fault code related to the Power Inverter Enable Control Circuit Short To Ground in a Jeep?
Regular maintenance checks, including inspecting the electrical components, can help detect any issues early and prevent the occurrence of fault codes like B1E72.
10. How long does it typically take to diagnose and repair the OBDII code B1E72 in a Jeep related to the Power Inverter Enable Control Circuit Short To Ground?
The time required for diagnosis and repair can vary based on the extent of the issue and availability of parts, but it may take a few hours to a day in most cases.
Discuss the causes and fixes for B1E72 Jeep OBDII Code
Code B1E72 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
